HDJD-JD05 Avago Technologies US Inc., HDJD-JD05 Datasheet - Page 8

• Manufacturer Part Number: HDJD-JD05
• Description: KIT DEV RGB COLOR SENSOR 20-QFN
• Manufacturer: Avago Technologies US Inc.

Specifications of HDJD-JD05

• Sensor Type: Light, Color Sensor
• Sensing Range: RGB
• Interface: 2-Wire Serial
• Voltage - Supply: 2.5 V ~ 3.6 V
• Embedded: No
• Utilized Ic / Part: ADJD-S313-QR999
• For Use With/related Products: ADJD-S313-QR999
• Lead Free Status / RoHS Status: Not applicable / Not applicable

To power on:
1. Turn on the power switch (SW1). The red LED will light
2. The green LED will light up if the USB cable is con-
3. Make sure the jumper (J2) is connected to supply 2.6V
4. Make sure the Sleep switch (SW5) is at the ‘lo’ position
Figure 4.2
Other switches:
Figure 4.3: Other switches

J2: Jumper for
2.6V supply
SW5: Sleep
switch
Lo
Press SW3 to
reset color
sensor
Press PB1 to
reset
microcontroller
up to indicate there is power supply to the board.
nected indicating there are communication between
the controller board and the computer.
to the sensor.
for sensor normal operation.
Hi
Note: You can switch it to ‘hi’ later if you want to put the
sensor in sleep mode to minimize power consumption
when sensor not in use.
To select white
LED current.
1 - 5mA
2 - 10mA
3 - 15mA
4 - 20mA
SW2: LED
switch
OFF
SW1: Power
switch
ON
OFF
ON