237-00156 SofTec Microsystems SRL, 237-00156 Datasheet - Page 36

• Manufacturer Part Number: 237-00156
• Description: BOARD ISOLATION FOR ST7
• Manufacturer: SofTec Microsystems SRL
• Type: Optoisolation Boardr

Specifications of 237-00156

• Contents: *
• For Use With/related Products: STMicro ST7FMC Motor Control Device
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3.
4.
5.
6.
7.
8.
must first disconnect the BLDC motor cable from the “MOTOR”
connector (J12) and from the “HALL SENSOR” connector (J19).
Connect the AC motor phases to the Motor Control board’s “MOTOR”
connector (J12) with the motor cable provided with the AC motor.
Connect the AC motor tachometer sensor to the Motor Control board’s
“TACHOMETER” connector (J16) with the tachometer cable provided
with the AC motor.
The Motor Control board and the Optoisolation board come already
connected through an ISP cable. Moreover, the Optoisolation board’s
power connector is also already connected to the Motor Control board’s
J2 connector. In this way, the Motor Control board automatically
supplies the Optoisolation board. Verify that both the power cable and
the ISP cable are connected as stated above.
Connect inDART-STX to the Optoisolation board with the other ISP
cable provided (from inDART-STX’s “ISP” connector to the
Optoisolation board’s “ICC IN” connector).
Connect inDART-STX to the host PC with the USB cable provided. The
green “POWER” LED on the instrument will turn on. Windows will
automatically recognize the instrument and will load the appropriate
USB driver.
Make sure that the “S1” jumper selects the “<35V ONLY” position, then
power up the Motor Control board by connecting the output terminals of
your DC power supply to the “MAINS” connector. The provided voltage
must be 30 V DC and your power supply must be able to provide a
current of 4 A.
AK-ST7FMC User's Manual
Page 35
4