237-00156 SofTec Microsystems SRL, 237-00156 Datasheet - Page 50

• Manufacturer Part Number: 237-00156
• Description: BOARD ISOLATION FOR ST7
• Manufacturer: SofTec Microsystems SRL
• Type: Optoisolation Boardr

Specifications of 237-00156

• Contents: *
• For Use With/related Products: STMicro ST7FMC Motor Control Device
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

16. From the DataBlaze’s main menu, select Edit > Option Bytes. The
17. From the DataBlaze’s main menu, select Operations > Auto. Make
18. Now the microcontroller is programmed. You can unplug the ISP cable
19. To start running the microcontroller, press the “RESET” push-button.
5.2.5 Push-Buttons
The following figure shows the location of the two push-buttons available in
the Motor Control board.
the AC_Metrowerks.s19 file located under the “object\Metrowerks”
subdirectory in your working directory. Click the “OK” button.
Option Bytes must be edited as detailed in Table 5.2: Option Bytes
Settings for ST7FMC ProgrammingTable 5.2: Option Bytes Settings for
ST7FMC ProgrammingTable 5.2: Option Bytes Settings for ST7FMC
Programming on page 45.
sure that all of the programming steps (but “Run”) are enabled. Click
the “START” button.
from the Motor Control board and use the Motor Control board in
standalone mode.
For details about how to control the motor with the Motor Control
board’s push-buttons and potentiometers, please refer to the “Push-
Buttons”, “Potentiometers” and “Standalone Mode: Driving an AC
Motor” sections here below.
1
Figure 5.5: Push Buttons
AK-ST7FMC User's Manual
2
Page 49
5