237-00156 SofTec Microsystems SRL, 237-00156 Datasheet - Page 44

• Manufacturer Part Number: 237-00156
• Description: BOARD ISOLATION FOR ST7
• Manufacturer: SofTec Microsystems SRL
• Type: Optoisolation Boardr

Specifications of 237-00156

• Contents: *
• For Use With/related Products: STMicro ST7FMC Motor Control Device
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

7.
8.
9.
10. From the main menu, choose File > Open Workspace. Select the
speeds, a set of real-time parameters (rising BEMF delay, falling BEMF
delay, Ki and Kp). These parameters must be fine tuned for the
minimum and maximum motor speed (the same speeds specified in the
Advanced Settings window) plus two other intermediate speeds of
your choice. During operation, the ST7FMC firmware will make a linear
extrapolation of real-time parameters in between the four specified
speeds to ensure smooth operation (for more information about
parameter collecting, refer to the STMicroelectronics’ Application Note
AN1905).
To run a BLDC motor in standalone mode (Open Loop), it is not
necessary to collect any real-time settings, since all real-time
parameters are controlled through the potentiometers.
Click the “Generate Source Files…” button. Browse for your working
directory and select the “\source” subdirectory. Click the “OK” button.
The appropriate header files will be generated and saved in the
“\source” subdirectory as *.h files. All parameters set in the AK-
ST7FMC Control Panel (other than the real-time parameters listed in
point 6) are saved automatically in the *.h files.
Run the STVD7 IDE by selecting Start > Programs > SofTec
Microsystems > inDART-STX > ST7 > STVD7 for inDART-STX.
“BLDC_Sensorless_Metrowerks.wsp” or “BLDC
Figure 5.2: BLDC Motor Closed Loop Parameters Collecting
Rising B-EMF Delay,
Falling B-EMF Delay,
Ki, Kp
Minimum speed
V1
V2
AK-ST7FMC User's Manual
Maximum speed
Target
Mechanical
Speed
Page 43
5