HS2556EPI61H Renesas Electronics America, HS2556EPI61H Datasheet - Page 219

• Manufacturer Part Number: HS2556EPI61H
• Description: EMULATOR BASE H8SX/2556
• Manufacturer: Renesas Electronics America

Specifications of HS2556EPI61H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

8.2.3
In this emulator, any access to the IC power control register (ICPCR) is invalid.
When HS2556EPI61H is in use, settings for the IC power control register depend on the selection made in
[Select P1VCC and P2VCC] of the [Configuration Properties] dialog box.
Table 8.11 ICPCR Values and [Select P1VCC and P2VCC] Setting
When HS2556EPI62H is in use, any access to the IC power control register (ICPCR) is invalid.
Note:
8.2.4
When accessing the reserved area, note the following:
If the reserved area is used, the operation in the actual MCU cannot be guaranteed. If the user program extends
to the reserved area during debugging, select the MCU having the largest ROM capacity.
8.2.5
When the RAME bit in SYSCR is 0, the internal RAM area can be used external addresses. Note that, however,
the only memory that can be accessed is User (external), not Emulator (emulation memory). In this case, the On-
Chip Read-write (Internal RAM) setting is applied for memory mapping.
8.2.6
This emulator does not emulate the flash memory in the MCU.
8.2.7
This emulator does not support the hardware standby function. Therefore, checking [User Standby enable] in the
[Configuration Properties] dialog box is invalid.
ICPCR Values
BUFGC2
0
1
1
0
If a session file that has been saved with HS2556EPI61H is loaded when using HS2556EPI62H, the
setting of [Select P1VCC and P2VCC] in the [Configuration Properties] dialog box is invalid.
IC Power Control Register
Access to the Reserved Area
Using the Internal RAM Area as External Addresses
Support of Flash Memory
Hardware Standby
BUFGC1
0
1
0
1
Selection in [Select P1VCC and P2VCC]
5V
3V
Not available because the voltage of P2VCC is the
same as that of P1VCC in this emulator.
Not available because the voltage of P2VCC is the
same as that of P1VCC in this emulator.
197