679301-1 Tyco Electronics, 679301-1 Datasheet - Page 6

• Manufacturer Part Number: 679301-1
• Description: TOOL 22-10AWG SOLIS CRIMP HEAD
• Manufacturer: Tyco Electronics

Specifications of 679301-1

• Lead Free Status / RoHS Status: Not applicable / Not applicable

6
626 Pneumatic Crimping Heads
of 7
3. Align the GO element with the crimping
chamber. Push the GO element straight into the
crimping chamber without using force. The GO
element must pass completely through the
crimping chamber. See Figure 8.
4. Align the NO–GO element with the crimping
chamber, and try to insert it straight into the
679301-1
2
1
7
3
Jaws Bottomed But Not
Under Pressure
NO-GO element may
enter partially, but must not
pass through the crimping
jaws.
Figure 8
8
GO element must pass
completely through the
crimping jaws.
18
Tyco Electronics Corporation
Figure 9 (cont’d)
4
6
11
5
If the jaw closure meets the plug gage conditions, the
crimping head is considered dimensionally correct
and should be lubricated with a THIN coat of any
good SAE 20 motor oil. If the crimping chambers do
not conform to the plug gage conditions, contact your
local Tyco Electronics Representative, or refer to
Section 7, REPLACEMENT AND REPAIR.
For additional information about the use of a plug
gage, see Instruction Sheet 408–7424.
7. REPLACEMENT AND REPAIR
Replacement parts and recommended spares are
listed in Figure 9. The recommended spares should
be stocked for immediate replacement. Parts should
be replaced by Tyco Electronics to ensure quality and
reliability of the tool. Order replacement parts through
your Tyco Electronics Representative, or call
1–800–526–5142, or send a facsimile of your
purchase order to 1–717–986–7605, or write to:
For tool repair service, please contact a Tyco
Electronics Representative at 1–800–526–5136.
Damaged contacts must be removed, discarded and
replaced.
8. REVISION SUMMARY
crimping chamber. The NO–GO element may start
entry but must not pass completely through the
chamber.
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105–3608
10
S Updated document to corporate requirements
S New format
19
20
9
14
16
15
17
408-4072
Rev
D