1643914-1 Tyco Electronics, 1643914-1 Datasheet - Page 16

• Manufacturer Part Number: 1643914-1
• Description: TOOL INSERTION/REMOVAL SIZE #8
• Manufacturer: Tyco Electronics
• Series: ELCONr
• Type: Extraction Toolr

Specifications of 1643914-1

• Tool Type: Insertion/Extraction Tool
• Description/function: Red tool
• Wire Gauge Range: 8
• Product: Insertion / Extraction Tool
• For Use With/related Products: Circular Connector Contacts
• For Use With: A36295 - CONN SOCKET #8 PCBA36294 - CONN SOCKET #8 CRIMP REMOVABLEA36280 - CONN PIN #8 PCB SILVERA36279 - CONN PIN #8 CRIMP SILVER
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: A36311

3.19. Repair
Damaged connectors must be removed, discarded, and replaced. Connectors with solder type contacts will
require desoldering of all contact solder tails. Solder type contacts are not removable from the housing
assembly.
Damaged crimp type contacts must be removed from the connector, discarded, and replaced with new ones.
4. QUALIFICATIONS
ELCON Drawer Series Connectors and Contacts are Recognized by Underwriters Laboratories Inc. (UL)/CSA
International in File E28476.
5. TOOLING
Hand and pneumatic crimping tools that accommodate the full wire size range are designed for terminating
crimp type contacts. The insertion/extraction tools are designed to insert and remove crimp type and threaded
contacts from connectors. The tool depresses the connector internal retention clips without deforming them.
Tooling part numbers and instructional material packaged with the tooling are shown in Figure 16.
16 of 17
CAUTION
1643914--1
1643915--1
1643916--1
1643917--1
1643921--1
1643922--1
NOTE
i
!
PN
Damaged product should not be used. If a damaged contact is evident before the contact is inserted into the housing,
cut the wire in back of the contact and re- - terminate the wire end. If contact is damaged after insertion, remove the
contact with the extraction tool and cut the wire in back of the contact and re- - terminate wire end.
Military standard Daniels bench mount crimping machine is applicable for terminating crimp type contacts. This
machine has been designed to form indents to the proper depth in the contact wire barrel. It requires a specially
designed funnel which helps gather wire strands and guide them into the closed barrel of the contacts. It is designed
for production requirements. Refer to Figure 16.
INSERTION
TIP COLOR
Yellow
TOOL
Blue
Red
------
------
------
EXTRACTION
TIP COLOR
Yellow
Insertion/Extraction
Tool (Typ)
(408- - 10159)
White
White
White
Blue
Red
For Wire Sizes 12- - 24 AWG
Hand Crimping Tool
601967- - 1 with
Turret Head 601967- - 2
(408- - 7516)
CONTACT
CONTACT
Tyco Electronics Corporation
SIZE
12
16
20
8
0
4
Figure 16
For Wire Sizes 1/0 and 8 AWG
Daniels Heavy Duty Pneumatic Bench Machine
M22520/23- - 01 with:
Wire Size 8 AWG
Daniels Indentor Head M22520/23- - 02
Daniels Locator M22520/23- - 09
Wire Size 1/0 AWG
Daniels Indentor Head M22520/23- - 05
Daniels Locator M22520/23- - 13
Wire Size 4 AWG
Daniels Indentor Head M22520/23- - 04
Daniels Locator M22520/23- - 11
Rev D