10054542-001LF FCI, 10054542-001LF Datasheet - Page 4

• Manufacturer Part Number: 10054542-001LF
• Description: CONN RECEPT SAS 22POS VERT PCB
• Manufacturer: FCI

Specifications of 10054542-001LF

• Connector Style: Receptacle
• Connector Type: SAS
• Number Of Positions: 22
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish: Gold
• Contact Finish Thickness: 3µin (0.08µm)
• Product: SAS Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 609-1549

5.0
NUMBER
TITLE
Copyright
Form E-3334
Rev F
5.1
5.2
5.3
5.4
ELECTRICAL CHARACTERISTICS
GS-12-239
FCI
exposure when measured in accordance with EIA 364-21C. The following details shall apply:
There shall be no evidence of arc-over, insulation breakdown, or excessive leakage current (> 0.5 mA)
when the mated connectors are tested in accordance with EIA 364-20C. The following details shall apply:
Perform in accordance with EIA 364-70A. Measure temperature vs. applied current for all contacts
The temperature rise above ambient shall not exceed 30 degrees C with all contacts powered at 0.5A.
Low Level Contact Resistance
Measurements shall be performed using a four-wire method per EIA 364-23B. The maximum initial signal
contact resistance is 35 mΩ for backpanel and orthogonal (one mated interface) applications and 50 mΩ
for coplanar applications. The increase in resistance for any position shall not exceed 10 mΩ. The
following details apply:
Insulation Resistance
The insulation resistance of mated connectors shall not be less than 1000 MΩ after environmental
Dielectric Withstanding Voltage
Current Rating
powered. The following details shall apply:
AirMax VS
a.
b.
c.
a.
b.
c.
d.
a.
b.
c.
d.
e.
a.
b.
c.
d.
Test voltage: 20 mV maximum open circuit
Test current: 100 mA maximum
Number of readings: 500 minimum
Test voltage: 500 VDC
Electrification time: 60 seconds
Points of measurement: between closest adjacent contacts
Number of readings: 30 (10 readings per loose-piece connector set)
Test voltage: 500 VAC, 60Hz
Test duration: 60 seconds
Voltage application rate: 500 V per second
Points of Measurement: between closest adjacent contacts
Number of readings: 30 (10 readings per loose-piece connector set)
Ambient conditions: still air at 25
Thermocouple location: mechanically attached to the base of the header mating contacts
Copper trace weight: 1 oz
Quantity and location of thermocouples: 10 (5 on an interior column at positions A, C, E, G, and I;
5 on an outside column at positions A, C, E, F, G, and I)
TYPE
®
Connector System, press-fit products
PRODUCT SPECIFICATION
o
C
PDM: Rev:F
STATUS:
PAGE
AUTHORIZED BY
STATUS
Tan Chen Hong
Released
4 of 11
UNRESTRICTED
Printed: Oct 04, 2008
REVISION
DATE
GS-01-001
30 Sep 08
F
.