ADNS-6010 Avago Technologies US Inc., ADNS-6010 Datasheet - Page 10

Optical Sensors - Board Mount Laser mouse sensor

ADNS-6010

Manufacturer Part Number
ADNS-6010
Description
Optical Sensors - Board Mount Laser mouse sensor
Manufacturer
Avago Technologies US Inc.
Datasheet

Specifications of ADNS-6010

Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
ADNS-6010
Quantity:
8 000
Single Fault Detection
ADNS-6010 is able to detect a short circuit, or fault,
condition at the RBIN and XY_LASER pins, which could
lead to excessive laser power output. A low resistance
path to ground on either of these pins will trigger the
fault detection circuit, which will turn off the laser drive
current source and set the LASER_NEN output high.
When used in combination with external components
as shown in the block diagram below, the system will
prevent excess laser power for a single short to ground
at RBIN or XY_LASER by shutting off the laser. Refer to the
PC board layout notes for recommendations to reduce
the chance of high resistance paths to ground existing
due to PC board contamination.
In addition to the continuous fault detection described
above, an additional test is executed automatically
whenever the LP_CFG0 register is written to. This test
Figure 9. Single Fault Detection and Eye-safety Feature Block Diagram
Figure 10. Distance from lens reference plane to surface
10
Sensor
PCB
Sensor
t ll
0.094
2.40
T
Lens
VCSEL PCB
lt
lt
l
t t
- 1
I
t l
VCSEL
I
VCSEL Clip
Surface
G
XY_
will check for a short to ground on the XY_LASER pin,
a short to VDD3 on the XY_LASER pin, and will test the
fault detection circuit on the XY_LASER pin.
Regulatory Requirements
x Passes FCC B and worldwide analogous emission limits
x Passes IEC-1000-4-3 radiated susceptibility level when
x Passes EN61000-4-4/IEC801-4 EFT tests when
x UL flammability level UL94 V-0.
_
when assembled into a mouse with shielded cable and
following Avago Technologies recommendations.
assembled into a mouse with shielded cable and
following Avago Technologies recommendations.
assembled into a mouse with shielded cable and
following Avago Technologies recommendations.

Related parts for ADNS-6010