MAX2830ETM+T Maxim Integrated Products, MAX2830ETM+T Datasheet - Page 27

• Manufacturer Part Number: MAX2830ETM+T
• Description: RF Transceiver 2.4GHz to 2.5GHz 802 .11g-b RF Transceive
• Manufacturer: Maxim Integrated Products

Specifications of MAX2830ETM+T

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 16. Register 0 (A3:A0 = 0000)
Table 17. Register 1 (A3:A0 = 0001)
Table 18. Register 2 (A3:A0 = 0010)
Table 19. Register 3 (A3:A0 = 0011)
Table 20. Register 4 (A3:A0 = 0100)
Table 21. Register 5 (A3:A0 = 0101)
2.4GHz to 2.5GHz 802.11g/b RF Transceiver, PA,
This register contains the 8-bit integer portion and 6 LSBs of the fractional portion of the divider ratio of the synthesizer.
DATA BITS
DATA BITS
DATA BITS
D13:D11
D13:D10
D13:D8
D13:D0
D11:D0
D13:D0
D7:D0
D9:D0
D8:D6
D4:D3
D1:D0
D10
D13
D12
BIT
BIT
BIT
D9
D5
D2
RECOMMENDED
RECOMMENDED
RECOMMENDED
RECOMMENDED
RECOMMENDED
RECOMMENDED
11011001100110
01000000000011
000110011010
1101000000
______________________________________________________________________________________
01111001
00000
0000
000
010
00
00
1
0
1
0
1
1
and Rx/Tx/Antenna Diversity Switch
6 LSBs of 20-Bit Fractional Portion of Main Divider
8-Bit Integer Portion of Main Divider. Programmable from 64 to 255.
Set to recommended value.
Fractional-N PLL Mode Enable. Set 1 to enable the fractional-N PLL or set 0 to enable the
integer-N PLL.
Set to recommended value.
14 MSBs of 20-Bit Fractional Portion of Main Divider
Set to recommended value.
Lock-Detector Output Select. Set to 1 for CMOS Output. Set to 0 for open-drain output. Bit D9
in register (A3:A0 = 0101) enables or disables an internal 30kΩ pullup resistor in open-drain
output mode.
Set to recommended value.
Set to recommended value.
Lock-Detect Output Internal Pullup Resistor Enable. Set to 1 to enable internal 30kΩ pullup
resistor or set to 0 to disable the resistor. Only available when lock-detect, open-drain output
is selected (A3:A0 = 0001, D12 = 1).
Set to recommended value.
Lock-Detect Output Enable. Set to 1 to enable the lock-detect output or set to 0 to disable the
output. The output is high impedance when disabled.
Set to recommended value.
Reference Frequency Divider Ratio to PLL. Set to 0 to divide by 1. Set to 1 to divide by 2.
Set to recommended value.
Set to recommended value.
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
DESCRIPTION
27