PDIUSBD12PWAA STEricsson, PDIUSBD12PWAA Datasheet - Page 18

• Manufacturer Part Number: PDIUSBD12PWAA
• Manufacturer: STEricsson

Specifications of PDIUSBD12PWAA

• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Operating Temperature Classification: Industrial
• Package Type: TSSOP
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Compliant

CD00222704
Product data sheet
11.3.2 Select Endpoint
11.3.3 Read Endpoint Status
11.3.4 Read Last Transaction Status register
Code (Hex) — 00 to 05
Transaction — read 1 B (optional)
The Select Endpoint command initializes an internal pointer to the start of the selected
buffer. Optionally, this command can be followed by a data read, which returns this byte.
Code (Hex) — 80 to 85
Transaction — read 1 B
Code (Hex) — 40 to 45
Transaction — read 1 B
The Read Last Transaction Status command is followed by one data read that returns the
status of the last transaction of the endpoint. This command also resets the corresponding
interrupt flag in the Interrupt register, and clears the status, indicating that it was read.
This command is useful for debugging purposes. The status information is overwritten for
each new transaction because it keeps track of every transaction.
Fig 11. Select Endpoint command: bit allocation
Fig 12. Read Endpoint Status: bit allocation
FULL/EMPTY: Logic 1 indicates that the buffer is full, logic 0 indicates an empty buffer.
STALL: Logic 1 indicates that the selected endpoint is in the stall state.
Rev. 12 — 8 April 2010
0 0
7 6 5 4 3 2
X X
7 6 5 4 3 2
0 x
X X
x 0
X X
x
1
1
0
USB peripheral controller with parallel bus
x
0
0
0
reserved
SETUP PACKET
reserved
BUFFER 0 FULL
BUFFER 1 FULL
ENDPOINT STALLED
Power-on value
FULL/EMPTY
STALL
reserved
004aaa804
004aaa056
PDIUSBD12
© ST-ERICSSON 2010. All rights reserved.
18 of 36