CY8C5386LTI-005 Cypress Semiconductor Corp, CY8C5386LTI-005 Datasheet - Page 54

• Manufacturer Part Number: CY8C5386LTI-005
• Manufacturer: Cypress Semiconductor Corp

Specifications of CY8C5386LTI-005

• Lead Free Status / RoHS Status: Compliant

8.9.1 Current DAC
The current DAC (IDAC) can be configured for the ranges 0 to
32 µA, 0 to 256 µA, and 0 to 2.048 mA. The IDAC can be
configured to source or sink current.
8.9.2 Voltage DAC
For the voltage DAC (VDAC), the current DAC output is routed
through resistors. The two ranges available for the VDAC are 0
to 1.024 V and 0 to 4.096 V. In voltage mode any load connected
to the output of a DAC should be purely capacitive (the output of
the VDAC is not buffered).
8.10 Up/Down Mixer
In continuous time mode, the SC/CT block components are used
to build an up or down mixer. Any mixing application contains an
input signal frequency and a local oscillator frequency. The
polarity of the clock, Fclk, switches the amplifier between
inverting or noninverting gain. The output is the product of the
input and the switching function from the local oscillator, with
frequency components at the local oscillator plus and minus the
signal frequency (Fclk + Fin and Fclk - Fin) and reduced-level
frequency components at odd integer multiples of the local oscil-
Document Number: 001-55035 Rev. *F
Reference
Source
PRELIMINARY
Scaler
Figure 8-10. DAC Block Diagram
lator frequency. The local oscillator frequency is provided by the
selected clock source for the mixer.
Continuous time up and down mixing works for applications with
input signals and local oscillator frequencies up to 1 MHz.
Figure 8-11. Mixer Configuration
sc_clk
Vin
Vref
PSoC
I
I
1x , 8x , 64x
1x , 8x , 64x
source
sink
R
Range
Range
mix
0 20k or 40k
®
3R
R
5: CY8C53 Family Data Sheet
0
1
Vout
C2 = 1.7 pF
C1 = 850 fF
R
mix
sc_clk
0 20k or 40k
Iout
Page 54 of 97
Vout
[+] Feedback