M38510/20304BFA E2V, M38510/20304BFA Datasheet - Page 6

• Manufacturer Part Number: M38510/20304BFA
• Manufacturer: E2V

Specifications of M38510/20304BFA

• Lead Free Status / RoHS Status: Supplier Unconfirmed

as modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM plan shall not
effect the form, fit, or function as described herein.
qualification and quality conformance inspection. The following additional criteria shall apply:
manufacturer qualifies to a faster device type which is manufactured identically to a slower device type on this
specification, then the slower device type may be part I qualified by conducting only group A electrical tests and any
electricals specified as additional group C subgroups and submitting data in accordance with MIL-PRF-38535
(i.e.,groups B, C, and D tests are not required).
MIL-PRF-38535 and as specified herein for groups A, B, C, and D inspections (see 4.4.1 through 4.4.4).
4. VERIFICATION
4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38535 or
4.2 Screening. Screening shall be in accordance with MIL-PRF-38535 and shall be conducted on all devices prior to
4.3 Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-38535.
4.3.1 Qualification extension. When authorized by the qualifying activity, for qualification inspection, if a
4.4 Technology Conformance inspection (TCI). Technology conformance inspection shall be in accordance with
c. Additional screening for space level product shall be as specified in MIL-PRF-38535, appendix B.
a. The burn-in test duration, test condition, and test temperature, or approved alternatives shall be as specified
b. Interim and final electrical test parameters shall be as specified in table II, except interim electrical
d. Class B devices processed to an altered item drawing may be programmed either before or after
in the device manufacturer's QM plan in accordance with MIL-PRF-38535. The burn-in test circuit shall be
maintained under document control by the device manufacturer's Technology Review Board (TRB) in
accordance with MIL-PRF-38535 and shall be made available to the acquiring or preparing activity upon
request. The test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in
accordance with the intent specified in test method 1015 of MIL-STD-883.
parameters test prior to burn-in is optional at the discretion of the manufacturer.
burn-in at the manufacturer’s discretion. The required electrical testing shall include, as a
minimum, the final electrical tests for programmed devices as specified in table II herein. Class S devices
processed by the manufacturer to an altered item drawing shall be programmed prior to
burn-in.
MIL-M-38510/203E
6