SLATAFL6GBJI STEC, SLATAFL6GBJI Datasheet

SLATAFL6GBJI

Manufacturer Part Number

SLATAFL6GBJI

Description

Manufacturer

STEC

Type

ATA Cardr

Datasheet

1.SLATAFL6GBJI.pdf (42 pages)

Specifications of SLATAFL6GBJI

Density

6GByte

Operating Supply Voltage (typ)

3.3/5V

Operating Temperature (min)

-40C

Operating Temperature (max)

85C

Package Type

Not Required

Mounting

Socket

Pin Count

Operating Temperature Classification

Industrial

Operating Supply Voltage (min)

3.18/4.75V

Operating Supply Voltage (max)

3.465/5.25V

Programmable

Yes

Lead Free Status / Rohs Status

Not Compliant

Current page: 1 of 42
Download datasheet (485Kb)

Web:

128 MB to 8 GB ATA Flash PC Cards

FEATURES

• ATA-4 Compatibility

• Support for PCMCIA I/O, Memory and True-IDE

• Form Factors: PC Card Type II

• Endurance Guarantee of 2,000,000 Write/Erase Cycles

• CIS (Card Information Structure) Programmed into 256

• Compatible with PC Card and Socket Services

• 5V or 3.3V Power Supply

• Completely Solid-State (No Moving Parts)

• Standard ECC Engine

• 7 Year Warranty

• Other Features Available

Interfaces

Bytes of Internal Memory

(Release 2.1 or later)

- Power Down Protection. A built-in feature that protects

- Endurance Status Monitor. A firmware option that

- Password Protection/Write Protection. A custom utility

the card from losing data during a write operation

when a lost of power or an unexpected removal from

the host system occurred.

allows applications to estimate the remaining life

span of the device.

software that allows the administrator and user to

set passwords for up to four partitions.

www.simpletech.com

(inquire for more information)

(where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp;

Document Part Number 61000-02810-110 July 2005

GENERAL DESCRIPTION

The SimpleTech SLATAFLxxxJ(U)(I)-(F)(S) are Type II ATA

Flash PC Cards with 128MB to 8GB of nonvolatile storage.

The cards use a flash memory controller that provides a

fully compatible ATA Flash PC Card interface for the flash

memory.

SimpleTech OEM ATA Flash PC Cards are the product of

choice in applications requiring high reliability and high

tolerance to shock, vibration, humidity, altitude, and

temperature. Because there are no moving parts to service or

maintain, ATA Flash PC Cards are reliable alternatives to

mechanical hard disk drives for high availability and mission

critical applications.

While the inherent ruggedness and reliability of solid state

storage relative to rotating hard drives is intuitive, new

applications for OEM ATA Flash PC Cards are emerging due

to the low cost per usable megabyte. Most applications using

embedded operating systems such as VxWorks™, Windows

XP/embedded™, and Linux™ don’t have multi-gigabyte

data storage requirements, and therefore a cost savings can

be realized when using this robust media.

ORDERING INFORMATION

Part Number

• SLATAFL128J .................. Type II .................... 128 MBytes

• SLATAFL256J .................. Type II .................... 256 MBytes

• SLATAFL512J .................. Type II .................... 512 MBytes

• SLATAFL1GBJ ................. Type II ......................... 1 GBytes

• SLATAFL2GBJ ................. Type II ......................... 2 GBytes

• SLATAFL3GBJ ................. Type II ......................... 3 GBytes

• SLATAFL4GBJ ................. Type II ......................... 4 GBytes

• SLATAFL5GBJ ................. Type II ......................... 5 GBytes

• SLATAFL6GBJ ................. Type II ......................... 6 GBytes

• SLATAFL7GBJ ................. Type II ......................... 7 GBytes

• SLATAFL8GBJ ................. Type II ......................... 8 GBytes

Option Designators

Options can be selected by using the Option Designators

in the part number in the following format:

SLATAFLxxxJ(U)(I)-(F)(S)

where

U RoHS compliant lead free product

F Media set to fixed storage for non-removable IDE

S Optimized for applications that store small (1-4 sector)

Commercial Operating Temperature range: 0 to 70°C

(designator is BLANK)

Industrial Operating Temperature range: -40 to 85°C

(designator=I)

applications, e.g operating systems that require fixed

device before the device can be used as a bootable

drive.

data packets e.g. transactional data acquisition.

SimpleTech P/N:

F=fixed device; S=small data packet optimized)

PC Card Form Factor

SLATAFLxxxJ(U)(I)-(F)(S)

Capacity

Page 1

Related parts for SLATAFL6GBJI

SLATAFL6GBJI Summary of contents

Page 1

ATA Flash PC Cards FEATURES • ATA-4 Compatibility • Support for PCMCIA I/O, Memory and True-IDE Interfaces • Form Factors: PC Card Type II • Endurance Guarantee of 2,000,000 Write/Erase Cycles • CIS (Card Information ...

Page 2

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) PACKAGE DIMENSIONS AND PIN LOCATIONS PC Card Type II Length ...................................... 3.370±0.008 in (85.60±0.20 mm) Width ........................................ 2.126±0.004 in (54.00±0.10 mm) Thickness ..................................... ...

Page 3

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) PIN ASSIGNMENTS PC Card Memory Mode Pin Signal Num Name 1 GND 2 D03 3 D04 4 D05 5 D06 6 D07 7 ...

Page 4

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) PIN ASSIGNMENTS (continued) PC Card Memory Mode Pin Signal Num Name 51 VCC ...

Page 5

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) SIGNAL DESCRIPTIONS Signal Name Dir BVD2 (PC Card Memory Mode) -SPKR (PC Card I/O Mode) -DASP (True IDE Mode) -CD1, ...

Page 6

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) SIGNAL DESCRIPTIONS Signal Name Dir -OE I (PC Card Memory Mode) -OE (PC Card I/O Mode) -OE (True IDE Mode) RDY/-BSY O (PC ...

Page 7

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) SIGNAL DESCRIPTIONS Signal Name Dir -CSEL I (PC Card Memory Mode) -CSEL (PC Card I/O Mode) -CSEL (True IDE Mode) -REG I (PC ...

Page 8

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) SIGNAL DESCRIPTIONS Signal Name Dir -WAIT O (PC Card Memory Mode) -WAIT (PC Card I/O Mode) IORDY (True IDE Mode) GND — 1, ...

Page 9

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) ABSOLUTE MAXIMUM RATINGS Parameter Voltage on any pin w.r.t. Vss Storage Temperature range RECOMMENDED OPERATING CONDITIONS Parameter Commercial operating temperature Industrial operating temperature ...

Page 10

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) ENVIRONMENTAL CHARACTERISTICS Leaded Cards (without the “U” option) Shock half-sine, 0.330 ms to 0.750 ms (per MIL-STD-202G Method 213B, Condition A) ...

Page 11

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) AC CHARACTERISTICS (Ta = 0°C to 70°C for commercial temperature parts –40°C to 85°C for industrial temperature parts; VCC = ...

Page 12

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) AC CHARACTERISTICS Attribute Memory Write AC Characteristics Speed Version: Item Write Cycle Time Write Pulse Width Address Setup Time Data Setup Time for ...

Page 13

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) AC CHARACTERISTICS I/O Access Read AC Characteristics Cycle Time Mode: Item Data Delay after -IORD Data Hold following -IORD -IORD Width Time Address ...

Page 14

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) AC CHARACTERISTICS I/O Access Write AC Characteristics Cycle Time Mode: Item Data Setup before -IOWR Data Hold following -IOWR -IOWR Width Time Address ...

Page 15

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) AC CHARACTERISTICS Register Access AC Characteristics for True IDE Parameter Cycle time (min) Address valid to -IORD/-IOWR (min) setup -IORD/-IOWR pulse width 8bit ...

Page 16

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) AC CHARACTERISTICS True IDE Mode Access Read/Write Timings ADDR valid -IORD/-IOWR D15 to D0 (Write) D15 to D0 (Read) -IOIS16 IORDY (continued) t0 ...

Page 17

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) HOST ACCESS SPECIFICATION Attribute Access Specifications The CIS can be accessed by Byte/Word/Odd-byte modes which are defined by PC Card card standard specifications. ...

Page 18

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Task File Register Access Specifications There are two cases of Task File register mapping, one is the mapped I/O address area, the other ...

Page 19

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Memory Address Map Task File Register Read Access Mode Mode -REG -CE2 Standby Mode x H Byte Access (8 bit ...

Page 20

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) True IDE Mode The card is configured in a True IDE mode of operation when the -OE input signal is asserted GND by ...

Page 21

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) CIS INFORMATION (TYPICAL) -------- 0000: Code 01, link -------- Tuple CISTPL_DEVICE (01), length 3 (03) at offset 0 Device ...

Page 22

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) -------- 0037: Code 1A, link -------- Tuple CISTPL_CONFIG (1A), length 5 (05) at offset 37 Last valid ...

Page 23

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) -------- 0064: Code 1B, link -------- Tuple ...

Page 24

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) CONFIGURATION REGISTER SPECIFICATION This card supports four configuration registers for the purpose of the configuration and observation of the card. These registers can ...

Page 25

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Configuration and Status Register (Address 202h) This register is used for observing the card state. bit7 bit6 bit5 CHGED SIGCHG IOIS8 Initial Value: ...

Page 26

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Pin Replacement Register (Address 204h) This register is used for providing the signal state of -IREQ when the card is configured as the ...

Page 27

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) TASK FILE REGISTER SPECIFICATION These registers are used for reading and writing data to the card. These registers are mapped four types by ...

Page 28

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Contiguous I/O Map (INDEX=1) -REG A10- ...

Page 29

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Secondary I/O Map (INDEX=3) -REG A10 A9- 17h 0 X 17h 0 X 17h 0 X 17h 0 X 17h 0 ...

Page 30

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Data Register The Data Register bit read/write register used for transferring data between the card and the host. This register ...

Page 31

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Sector Count Register This register contains the numbers of sectors of data requested to be transferred on a read or write operation between ...

Page 32

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Drive/Head Register This register select the device address translation (CHS or LBA) and provides head address (CHS) or high order address bits 27:24 ...

Page 33

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Status Register This read only register indicates status of a command execution. When the BSY bit is “0”, the other bits are valid; ...

Page 34

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Device Control Register This write only register is used for controlling the interrupt request and issuing an ATA soft reset to the card. ...

Page 35

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) ATA COMMAND SPECIFICATIONS This table with the following paragraphs summarizes the ATA command set. No. Command set 1 Check Power Mode 2 Execute ...

Page 36

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Check Power Mode (code: E5h or 98h) This command checks the power mode. Execute Drive Diagnostic (code: 90h) This command performs the internal ...

Page 37

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Word Data Total Address Bytes 0 848AH 2 General configuration bit-significant information (value=044AH for versions with the -F suffix) 1 XXXXH 2 Default ...

Page 38

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Request Sense (code: 03h) This command requests an extended error code after a command ends with an error. Refer to table below. Code ...

Page 39

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Write Multiple (code: C5h) This command is similar to the Write Sectors command. Interrupts are not presented on each sector, but on the ...

Page 40

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) SECTOR TRANSFER PROTOCOL Sector Read One sector read procedure after the card is configured to I/O interface is shown in the following charts. ...

Page 41

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) Sector Write One sector write procedure after the card is configured to I/O interface is shown in the following charts. Set the cylinder ...

Page 42

SLATAFLxxxJ(U)(I)-(F)(S) SimpleTech P/N: (where xxx=capacity; U=RoHS compliant lead-free; I=Ind. Op. Temp; F=fixed device; S=small data packet optimized) REVISION HISTORY Rev. Change Description from Previous Revision -101 2/1/04. Initial Release. -102 5/26/04. Sleep mode current at 3.3V corrected to 80µA from ...

Related keywords

SLATAFL6GBJI datasheet
SLATAFL6GBJI data sheet
SLATAFL6GBJI pdf datasheet
SLATAFL6GBJI component
SLATAFL6GBJI part
SLATAFL6GBJI distributor
SLATAFL6GBJI RoHS
SLATAFL6GBJI datasheet download