AT94K05AL-25AQU Atmel, AT94K05AL-25AQU Datasheet - Page 51

• Manufacturer Part Number: AT94K05AL-25AQU
• Description: IC FPSLIC 5K GATE 25MHZ 100-TQFP
• Manufacturer: Atmel
• Series: FPSLIC®r

Specifications of AT94K05AL-25AQU

• Core Type: 8-bit AVR
• Speed: 25MHz
• Interface: I²C, UART
• Program Sram Bytes: 4K-16K
• Fpga Sram: 2kb
• Data Sram Bytes: 4K ~ 16K
• Fpga Core Cells: 256
• Fpga Gates: 5K
• Fpga Registers: 436
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• For Use With: ATSTK594 - BOARD FPSLIC DAUGHTER FOR STK500
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

1138I–FPSLI–1/08
Status Register – SREG
The AVR status register
Note:
• Bit 7 - I: Global Interrupt Enable
The global interrupt enable bit must be set (one) for the interrupts to be enabled. The individual
interrupt enable control is then performed in separate control registers. If the global interrupt
enable register is cleared (zero), none of the interrupts are enabled independent of the individual
interrupt enable settings. The I-bit is cleared by the hardware after an interrupt has occurred,
and is set by the RETI instruction to enable subsequent interrupts.
• Bit 6 - T: Bit Copy Storage
The bit copy instructions BLD (Bit LoaD) and BST (Bit STore) use the T-bit as source and desti-
nation for the operated bit. A bit from a register in the register file can be copied into T by the
BST instruction, and a bit in T can be copied into a bit in a register in the register file by the BLD
instruction.
• Bit 5 - H: Half-carry Flag
The half-carry flag H indicates a half-carry in some arithmetic operations.
• Bit 4 - S: Sign Bit, S = N ⊕ V
The S-bit is always an exclusive or between the negative flag N and the two’s complement over-
flow flag V.
• Bit 3 - V: Two’s Complement Overflow Flag
The two’s complement overflow flag V supports two’s complement arithmetics.
• Bit 2 - N: Negative Flag
The negative flag N indicates a negative result from an arithmetical or logical operation.
• Bit 1 - Z: Zero Flag
The zero flag Z indicates a zero result from an arithmetical or logical operation.
• Bit 0 - C: Carry Flag
The carry flag C indicates a carry in an arithmetical or logical operation.
BitM
$3F ($5F)
Read/Write
Initial Value
1. Note that the status register is not automatically stored when entering an interrupt routine and
restored when returning from an interrupt routine. This must be handled by software.
7
I
R/W
0
(1)
6
T
R/W
0
– SREG – at I/O space location $3F ($5F) is defined as:
5
H
R/W
0
4
S
R/W
0
AT94KAL Series FPSLIC
3
V
R/W
0
2
N
R/W
0
1
Z
R/W
0
0
C
R/W
0
SREG
51