20-101-1196 Rabbit Semiconductor, 20-101-1196 Datasheet - Page 15

• Manufacturer Part Number: 20-101-1196
• Description: MODULE RABBITCORE RCM3900
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1196

• Module/board Type: MPU Core Module
• For Use With/related Products: RCM3900
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-101-1196; 316-1155

2.2.2 Step 2 — Connect Programming Cable
The programming cable connects the RCM3900 to the PC running Dynamic C to down-
load programs and to monitor the RCM3900 module during debugging.
Connect the 10-pin connector of the programming cable labeled
to header J1 on
PROG
the RCM3900 as shown in Figure 3. There is a small dot on the circuit board next to pin 1
of header J1. Be sure to orient the marked (usually red) edge of the cable towards pin 1 of
the connector. (Do not use the
DIAG
connector, which is used for a nonprogramming
serial connection.)
Figure 3. Connect Programming Cable and Power Supply
Connect the other end of the programming cable to an available USB port on your PC or
workstation. Your PC should recognize the new USB hardware, and the LEDs in the
shrink-wrapped area of the USB programming cable will flash.
RabbitCore RCM3900 User’s Manual
15