CS8952-CQZ Cirrus Logic Inc, CS8952-CQZ Datasheet - Page 39

• Manufacturer Part Number: CS8952-CQZ
• Description: IC TXRX 100/10 PHY 100TQFP
• Manufacturer: Cirrus Logic Inc
• Type: Transceiverr

Specifications of CS8952-CQZ

• Package / Case: 100-TQFP, 100-VQFP
• Protocol: MII
• Voltage - Supply: 4.75 V ~ 5.25 V
• Mounting Type: Surface Mount
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Product: Ethernet Transceivers
• Number Of Transceivers: 1
• Standard Supported: 100BASE-FX or 100BASE-TX or 10BASE-T
• Data Rate: 10 Mbps or 100 Mbps
• Supply Voltage (max): 6 V
• Supply Voltage (min): - 0.3 V
• Supply Current (max): +/- 10 mA
• Maximum Operating Temperature: + 70 C
• Supply Voltage Range: 4.75V To 5.25V
• Logic Case Style: TQFP
• No. Of Pins: 100
• Operating Temperature Range: 0°C To +70°C
• Msl: MSL 3 - 168 Hours
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Driver Case Style: TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Drivers/receivers: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 598-1206

6.7
CrystalLAN™ 100BASE-X and 10BASE-T Transceiver
DS206F1
15:5
4
3
2
1
0
BIT
15
7
Reserved
Parallel Detection
Fault
Link Partner Next
Page Able
Next Page Able
Page Received
Link Partner Auto-
Neg Able
Auto-Negotiation Expansion Register - Address 06h
NAME
Reserved
14
6
Read Only 000 0000 0000
Read Only 0
Read Only 0
Read Only 1
Read Only 0
Read Only 0
TYPE
13
5
Detection Fault
Parallel
RESET
12
4
Reserved
Link Partner
Next Page
When set, this bit indicates an error condition in
which both the 10BASE-T and 100BASE-TX links
came up valid, or that one of the technologies estab-
lished a link but was unable to maintain the link. This
bit is self-clearing.
When set, this bit indicates that the link partner is
capable of Next Page exchange.
This bit is a status bit which indicates to the Manage-
ment Layer that the CS8952 supports Next Page
capability.
Note: This bit is disabled, and writes to this bit are
ignored when the National Compatibility Mode bit of
the 10BASE-T Configuration Register (address 1Ch)
is set.
When set, this bit indicates that a valid word of auto-
negotiation data has been received and its integrity
verified. The first page of data will consist of the Base
Page, and all successive pages will consist of Next
Page data. This bit is self-clearing.
When set, this bit indicates that the link partner has
auto-negotiation capability.
Able
11
3
Next Page
Able
10
2
DESCRIPTION
Page Received
9
1
Auto-Neg Able
CS8952
Link Partner
8
0
39