KIT_TC1797_SK Infineon Technologies, KIT_TC1797_SK Datasheet - Page 152

• Manufacturer Part Number: KIT_TC1797_SK
• Description: KIT STARTER AUDO FUTURE TC1797
• Manufacturer: Infineon Technologies
• Series: Audo Futurer
• Type: MCUr

Specifications of KIT_TC1797_SK

• Contents: Board, Adapters, Cables, CD, Power Supply
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: TC1797
• Other names: KITTC1797SKIN

3) Not using the E-Ray module, E-Ray PLL in an application lowers the current consumption for typically 9mA.
4) The
5) Not tested in production separately, verified by design / characterization.
6) This value assumes worst case of reading flash line with all cells erased. In case of 50% cells written with “1”
7) Relevant for the power supply dimensioning, not for thermal considerations.
8) No GPIO and EBU activity, LVDS off
9) This value is relevant for the power supply dimensioning. The currents caused by the GPIO and EBU activity
Data Sheet
Realistic Pattern.
The dependency in this range is, at constant junction temperature, linear.
and 50% cells written with “0”, the maximum current drops down to 95 mA.
In case of erase of Data Flash, internal flash array loading effects may generate transient current spikes of up
to 15 mA for maximum 5 ms.
depend on the particular application and should be added separately. If two Flash modules are programmed
in parallel, the current increase is 2 × 24 mA.
I
DD
decreases by typically 70 mA if the
f
CPU
148
is decreased by 50 MHz, at constant
Electrical Parameters
T
J
= 150
V1.1, 2009-04
TC1797
o
C, for the