S1D13705F00A200 Epson, S1D13705F00A200 Datasheet - Page 263

• Manufacturer Part Number: S1D13705F00A200
• Manufacturer: Epson

Specifications of S1D13705F00A200

• Operating Supply Voltage (typ): 3.3/5V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Package Type: TQFP
• Pin Count: 80
• Mounting: Surface Mount
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / Rohs Status: Compliant

1: Windows
1.3 Example Installation
Installation for CEPC Environment
1.4 Comments
6-4
Windows
described below:
1. To load CEPC from a floppy drive:
2. To load CEPC from a hard drive:
• Alternatively, in the examples above, you could substitute 4BPP instead of 8BPP.
• On some CEPC systems creating the 1M byte address hole will cause
LOADCEPC.EXE to fail. In this case contact your Sales Representative for a newer version of
LOADCEPC.EXE called LOAD211X.EXE.
®
CE DISPLAY DRIVERS
a. Create a DOS bootable floppy disk.
b. Edit CONFIG.SYS on the floppy disk to contain the following line only.
c. Edit AUTOEXEC.BAT on the floppy disk to contain the following lines.
d. Copy LOADCEPC.EXE from c:\wince\public\common\oak\bin to the bootable floppy
e. Confirm that NK.BIN is located in c:\wince\release.
f. Reboot the system from the bootable floppy disk.
a. Copy LOADCEPC.EXE to the root directory of the hard drive.
b. Edit CONFIG.SYS on the hard drive to contain the following line only.
c. Edit AUTOEXEC.BAT on the hard drive to contain the following lines.
d. Confirm that NK.BIN is located in c:\wince\release.
e. Reboot the system from the hard drive.
®
CE v2.0 can be loaded on a PC using a floppy drive or a hard drive. The two methods are
disk.
device=a:\himem.sys
mode com1:9600,n,8,1
loadcepc /B:9600 /C:1 /D:2 c:\wince\release\nk.bin
device=c:\himem.sys
mode com1:9600,n,8,1
loadcepc /B:9600 /C:1 /D:2 c:\wince\release\nk.bin
EPSON
S1D13705F00A Windows
DRIVERS (X27A-E-001-01)
®
CE DISPLAY