s71pl129ja0 Meet Spansion Inc., s71pl129ja0 Datasheet - Page 62

• Manufacturer Part Number: s71pl129ja0
• Description: Stacked Multi-chip Product Mcp Flash Memory And Psram 128 Megabit 8m X 16-bit Cmos 3.0 Volt-only Simultaneous Operation, Page Mode Flash Memory With 64/32/16 Megabit 4m/2m/1m X 16-bit Pseudo-static Ram
• Manufacturer: Meet Spansion Inc.

Absolute Maximum Ratings
62
+0.8 V
–0.5 V
–2.0 V
Maximum Negative Overshoot Waveform
Storage T emperature Plastic Packages . . . . . . . . . . . . . . . . –65° C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . –65° C to +125°C
Voltage with Respect to Ground
V
A9, OE# , and RESET#
WP#/ACC
All other pins
Output Short Circuit Current
Not es:
1. Minimum DC voltage on input or I/ O pins is –0.5 V. During voltage transitions,
2. Minimum DC input voltage on pins A9, OE#, RESET# , and WP# / ACC is –0.5 V.
3. No more than one output may be shorted to ground at a time. Duration of the
4. Stresses above those listed under “Absolute Maximum Ratings” may cause perma-
CC
20 ns
input or I/ O pins may overshoot V
DC voltage on input or I/O pins is V
I/O pins may overshoot to V
During voltage transitions, A9, OE#, WP#/ACC, and RESET# may overshoot V
to –2.0 V for periods of up to 20 ns. See
pin A9, OE#, and RESET# is +12.5 V which may overshoot to +14.0 V for periods
up to 20 ns. Maximum DC input voltage on WP#/ACC is +9.5 V which may
overshoot to +12.0 V for periods up to 20 ns.
short circuit should not be greater than one second.
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
sections of this data sheet is not implied. Exposure of the device to absolute max-
imum rating conditions for extended periods may affect device reliability.
(Note
1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V
(Note
20 ns
(Note
2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +10.5 V
Figure 8. Maximum Overshoot Waveforms
1) . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to V
20 ns
(Note
A d v a n c e
(Note
2) . . . . . . . . . . . . . . . . . . . . . –0.5 V to +13.0 V
CC
S29PL129J for MCP
+2.0 V for periods up to 20 ns. See
SS
3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
CC
to –2.0 V for periods of up to 20 ns. Maximum
+0.5 V. During voltage transitions, input or
Figure
+2.0 V
+0.5 V
I n f o r m a t i o n
2.0 V
V
V
CC
CC
8. Maximum DC input voltage on
Maximum Positive Overshoot Waveform
20 ns
Figure
CC
20 ns
S29PL129J_MCP_00_A0 June 4, 2004
+0.5 V
8.
SS
20 ns