MCIMX6U6AVM08AB Freescale Semiconductor, MCIMX6U6AVM08AB Datasheet - Page 34

• Manufacturer Part Number: MCIMX6U6AVM08AB
• Description: Processors - Application Specialized i.MX6 DualLite
• Manufacturer: Freescale Semiconductor
• Type: Automotive and Infotainment Processorsr

Specifications of MCIMX6U6AVM08AB

• Rohs: yes
• Core: ARM Cortex A9
• Processor Series: i.MX6
• Data Bus Width: 64 bit
• Maximum Clock Frequency: 800 MHz
• Instruction / Data Cache Memory: 32 KB
• Data Ram Size: 128 KB
• Data Rom Size: 96 KB
• Operating Supply Voltage: 1.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: BGA 2240
• Interface Type: I2S, SSI, AC97, ESAI, UARTS, eCSPI, I2C, Ethernet, PWM, SJC, GPIO, KPP, SPDIF
• Memory Type: DDR3
• Minimum Operating Temperature: - 40 C
• Number Of Timers: 2

Electrical Characteristics
enabled for applications needing to keep the output voltage alive during low-power modes where the main
regulator driver and its associated global bandgap reference module are disabled. The output of the
weak-regulator is not programmable and is a function of the input supply as well as the load current.
Typically, with a 3 V input supply the weak-regulator output is 2.525 V and its output impedance is
approximately 40
For additional information, see the i.MX 6Solo/6DualLite reference manual.
4.3.2.3
The LDO_USB module implements a programmable linear-regulator function from the
USB_OTG_VBUS and USB_H1_VBUS voltages (4.4 V–5.25 V) to produce a nominal 3.0 V output
voltage. The regulator has been designed to be stable with a minimum external low ESR decoupling
capacitor of 1 µF (2.2 µF should be considered the recommended minimum value for component
selection), though the actual capacitance required should be determined by the application. A
programmable brown-out detector is included in the regulator that can be used by the system to determine
when the load capability of the regulator is being exceeded, to take the necessary steps. This regulator has
a built in power-mux that allows the user to select to run the regulator from either VBUS supply, when both
are present. If only one of the VBUS voltages is present, then, the regulator automatically selects this
supply. Current limit is also included to help the system meet in-rush current targets.
For additional information, see the i.MX 6Solo/6DualLite reference manual.
4.4
4.4.1
4.4.2
34
PLL’s Electrical Characteristics
Audio/Video PLL’s Electrical Parameters
528 MHz PLL
LDO_USB
i.MX 6Solo/6DualLite Automotive and Infotainment Applications Processors, Rev. 1
Ω
Clock output range
Clock output range
.
Reference clock
Reference clock
Parameter
Parameter
Lock time
Lock time
Table 17. Audio/Video PLL’s Electrical Parameters
Table 18. 528 MHz PLL’s Electrical Parameters
<11250 reference cycles
<11250 reference cycles
528 MHz PLL output
650 MHz ~1.3 GHz
24 MHz
24 MHz
Value
Value
Freescale Semiconductor