CDB5532U Cirrus Logic Inc, CDB5532U Datasheet - Page 5

• Manufacturer Part Number: CDB5532U
• Description: BOARD EVAL FOR CS5532U ADC
• Manufacturer: Cirrus Logic Inc

Specifications of CDB5532U

• Number Of Adc's: 2
• Number Of Bits: 24
• Sampling Rate (per Second): 3.84k
• Data Interface: Serial
• Inputs Per Adc: 1 Differential
• Input Range: ±2.5 V
• Power (typ) @ Conditions: 35mW @ 3.84kSPS
• Voltage Supply Source: Analog and Digital, Dual ±
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: CS5532
• Description/function: Audio DSPs
• Operating Supply Voltage: 5 V
• Product: Audio Modules
• For Use With/related Products: C8051F320
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1159

2. SOFTWARE
The evaluation board comes with software and a USB cable to link the evaluation board to the PC. The
software is designed to run under Windows
2.1
2.1.1
2.1.2
2.1.3
Run the program by selecting Start
2.2
Before launching the evaluation program, the user should set up the CDB5532U evaluation board, select
the proper jumper settings as described in Section 1, ensure the board is connected to an open USB port
on the PC, and apply power to the board.
DS807DB1
Installation Procedure
Using the Software
1. Ensure the CDB5532U USB cable is disconnected from the PC.
1. Apply power to the CDB5532U. Press and release the Reset switch, S1.
2. Open GUI software installation folder CDB553x_cvidistkit.Eval5534U
3. Run SETUP.EXE by double clicking on the filename.
4. Select Next, I Accept License Agreement, Next, Next, Finish.
2. Use the included USB cable to connect the CDB5532U to the PC. The PC operating system should
3. From the installation wizard, select Install from a list or specific location (Advanced). Select Search
4. Select Include this location in the search.
5. Click the Browse... button.
6. Go to folder C:/Program Files/Eval5534U/Driver and click OK.
7. Press the Next button.
8. A Hardware Installation dialog will appear. Press Continue Anyway.
9. Select Browse... and go to folder C:/Program Files/Eval5534U/Driver. Press Open.
10. A Files Needed dialog will appear. Press OK.
11. The Found New Hardware wizard will appear. Press the Finish button.
CDB553xU GUI Software Installation Instructions
Installing the USB Drivers
Running the GUI
automatically launch the Found New Hardware wizard.
for the best driver in these locations.
All Programs
®
2000 or later.
Eval5534U
Eval5534_U.
Volume1.
CDB5532U
5