EVAL-ADV7179EBM Analog Devices Inc, EVAL-ADV7179EBM Datasheet - Page 12

• Manufacturer Part Number: EVAL-ADV7179EBM
• Description: BOARD EVAL FOR ADV7179
• Manufacturer: Analog Devices Inc

Specifications of EVAL-ADV7179EBM

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3.1.1 Jumper Settings
Table 3-1 EVAL-ADV7174/79EBM Jumper Definitions
Encoder Module
Jumper(s)
Deserializer Module
EVAL-ADV7174/79EBM Application Note Rev.0
21
st
Oct 2002
J10
J1
J1
J2
J3
J4
J5
J6
J7
J8
J9
Jumper
Positions.
J1A
J1B
J2A
J2B
J3A
J3B
J10A
J10B
The EVAL-ADV7174/79EBM jumper settings are shown in Table 3-1
Valid
Analog Devices B.V. PRELIMINARY
Silkscreen
Marking
EQ/
MODE
Clock
Sets up the ALSB address for the ADV7174/79
J1 inserted MPU address = 54h
J1 removed MPU address = D4h
J1A enables cable equalisation
J1B disables cable equalisation
J2A enables NRZI and SMPTE decoding of the digital
serial input
J2B disables NRZI and SMPTE decoding of the digital
serial input
J3A OE/ of U3, U2 levelshifters are connected to 5V.
J3B OE/ of U3, U2 levelshifters are connected to 3.3V.
J4 inserted connects OE/ of U3, U2 levelshifters to
ground.
J4 removed connects OE/ according to J3 settings
PSEN of Adu connected to ground. Removal of this
jumper will cause the Adu to download new code after
a board reset. If no code is available the Adu memory
will be erased.
Removal of this jumper disconnects SCLK signals
coming from the Adu from the SCLK net on the board.
Removal of this jumper disconnects SDA signals
coming from the Adu from the SDA net on the board.
Removal of this jumper disconnects SDA coming from
the P2 connector from the SDA net on the board.
Removal of this jumper disconnects SCLK coming
from the P2 connector from the SCLK net on the
board.
J10A enables the on-board oscillator to clock the
encoder.
J10B enables the clock from the SDI input to clock the
encoder.
Description
Video Group Limerick
12 of 22