EVAL-ADV7179EBM Analog Devices Inc, EVAL-ADV7179EBM Datasheet - Page 21

• Manufacturer Part Number: EVAL-ADV7179EBM
• Description: BOARD EVAL FOR ADV7179
• Manufacturer: Analog Devices Inc

Specifications of EVAL-ADV7179EBM

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.0 Relevant Information
5.1 Microcode Download
EVAL-ADV7174/79EBM Application Note Rev.0
21
st
Oct 2002
The Evaluation Board can be operated with either the Micro-Code or the
Evaluation Software.
Micro-Code Download:
1.
2.
3.
4.
5.
6.
Analog Devices B.V. PRELIMINARY
Connect the 9-pin D-type connector that is supplied with the kit between the
evaluation board - P4 and a free serial com port on the PC.
Install the Micro-converter download program on the PC. This can be done by
running `setup.exe` in the `microcode` folder on the ADV7174/79EBM
evaluation CD.
pressing S2. This action will clear any code from the micro-converter.
On the main windows task bar select, START..PROGRAMS…AduC….WSD.
The Windows Software Download program should open and if communication
between the evaluation board and PC is OK, the message `Resetting AduC812
OK` will be displayed.
Click on download and select the hex file you wish to load into the micro-
controller. The evaluation board hex file can be found the `MIRCOCODE`
folder. Once you select the file download will start automatically. When the file
has downloaded, `OK ` will be displayed.
Remove the jumper J5 and reset the board using S2. Your code has now
downloaded.
Insert jumper J5, apply power to the evaluation board and implement a reset by
Video Group Limerick
21 of 22