PIC16F688T-I/SL Microchip Technology, PIC16F688T-I/SL Datasheet - Page 21

• Manufacturer Part Number: PIC16F688T-I/SL
• Description: IC MCU PIC FLASH 4KX14 14SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F688T-I/SL

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 12
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 14-SOIC (3.9mm Width), 14-SOL
• Controller Family/series: PIC16F
• No. Of I/o's: 12
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 256Byte
• Cpu Speed: 20MHz
• No. Of Timers: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT14SO-1 - SOCKET TRANSITION 14SOIC 150/208AC162061 - HEADER INTRFC MPLAB ICD2 20PINAC162056 - HEADER INTERFACE ICD2 16F688
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: PIC16F688T-I/SL; PIC16F688T-I/SLTR

1.5.3
1997 Microchip Technology Inc.
Packaging Varieties
Depending on the development phase of your project, one of three package types would be used:
The first is a device with an erasure window. Typically these are found in packages with a ceramic
body. These devices are used for the development phase, since the device’s program memory
can be erased and reprogrammed many times.
The second package type is a low cost plastic package. This package type is used in production
where device cost is to be kept to a minimum.
Lastly, there is the DIE option. A DIE is an unpackaged device that has been tested. DIEs are
used in low cost designs and designs where board space is at a minimum.
quick summary of this.
Table 1-3:
Windowed
Plastic
DIE
Package Type
Typical Package Uses
Typical Usage
Development Mode
Production
Special Applications, such as those which require minimum board space
Section 1. Introduction
Table 1-3
DS31001A-page 1-9
shows a
1