PIC24FJ64GA102-I/SO Microchip Technology, PIC24FJ64GA102-I/SO Datasheet - Page 10

• Manufacturer Part Number: PIC24FJ64GA102-I/SO
• Description: IC MCU 16BIT 64KB FLASH 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ64GA102-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/IrDA/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001, MA240020, DM240002, DM240011, DV164033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit
• Controller Family/series: PIC24
• Ram Memory Size: 8KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Embedded Interface Type: I2C, LIN, SPI, USART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FJ64GA104 FAMILY
1.2
• Peripheral Pin Select: The Peripheral Pin Select
• Communications: The PIC24FJ64GA104 family
• Analog Features: All members of the
• CTMU Interface: This module provides a
• Parallel Master/Enhanced Parallel Slave Port:
• Real-Time Clock/Calendar: This module
DS39951C-page 10
feature allows most digital peripherals to be
mapped over a fixed set of digital I/O pins. Users
may independently map the input and/or output of
any one of the many digital peripherals to any one
of the I/O pins.
incorporates a range of serial communication
peripherals to handle a range of application
requirements. There are two independent I
modules that support both Master and Slave
modes of operation. Devices also have, through
the Peripheral Pin Select (PPS) feature, two
independent UARTs with built-in IrDA
encoder/decoders and two SPI modules.
PIC24FJ64GA104 family include a 10-bit A/D
Converter module and a triple comparator
module. The A/D module incorporates program-
mable acquisition time, allowing for a channel to
be selected and a conversion to be initiated
without waiting for a sampling period, as well as
faster sampling speeds. The comparator module
includes three analog comparators that are
configurable for a wide range of operations.
convenient method for precision time measure-
ment and pulse generation, and can serve as an
interface for capacitive sensors.
One of the general purpose I/O ports can be
reconfigured for enhanced parallel data communi-
cations. In this mode, the port can be configured
for both master and slave operations, and
supports 8-bit and 16-bit data transfers with up to
12 external address lines in Master modes.
implements a full-featured clock and calendar with
alarm functions in hardware, freeing up timer
resources and program memory space for the use
of the core application.
Other Special Features
®
2
C™
1.3
Devices in the PIC24FJ64GA104 family are available
in 28-pin and 44-pin packages. The general block
diagram for all devices is shown in Figure 1-1.
The devices are differentiated from each other in
several ways:
• Flash Program Memory:
• Available I/O Pins and Ports:
• Available Interrupt-on-Change Notification (ICN)
• Available Remappable Pins:
• Available PMP Address Pins:
• Available A/D Input Channels:
All other features for devices in this family are identical.
These are summarized in Table 1-1.
A
PIC24FJ64GA104 family devices, sorted by function, is
shown in Table 1-2. Note that this table shows the pin
location of individual peripheral features and not how
they are multiplexed on the same pin. This information
is provided in the pinout diagrams in the beginning of
this data sheet. Multiplexed features are sorted by the
priority given to a feature, with the highest priority
peripheral being listed first.
- PIC24FJ32GA1 devices – 32 Kbytes
- PIC24FJ64GA1 devices – 64 Kbytes
- 28-pin devices – 21 pins on two ports
- 44-pin devices – 35 pins on three ports
Inputs:
- 28-pin devices – 21
- 44-pin devices – 31
- 28-pin devices – 16 pins
- 44-pin devices – 26 pins
- 28-pin devices – 3 pins
- 44-pin devices – 12 pins
- 28-pin devices – 10 pins
- 44-pin devices – 13 pins
list
Details on Individual Family
Members
of
the
pin
 2010 Microchip Technology Inc.
features
available
on
the