PIC24FJ64GA104-I/PT Microchip Technology, PIC24FJ64GA104-I/PT Datasheet - Page 20

• Manufacturer Part Number: PIC24FJ64GA104-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ64GA104-I/PT

• Core Size: 16-Bit
• Program Memory Size: 64KB (22K x 24)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC24
• Ram Memory Size: 8KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: I2C, LIN, SPI, USART
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, LIN, SPI, USART
• Rohs Compliant: Yes
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, IrDA, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001, MA240020, DM240002, DM240011, DV164033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

DS51873B-page 20
• USE_CAPTOUCH enables the capacitive touch sensing algorithm. Effective cap
• USE_HARVESTER enables energy harvester State-of-Charge monitoring. When
• DEFAULT_MODE sets the default Low-Power mode, selecting between Sleep,
• DEFAULT_SENSOR sets the default sensor, selecting between temperature,
• DEFAULT_TX sets the default transmitter setting. If true, the demo will have UART
touch sensing requires a fast response time (about 100 ms), which can drain too
much power for some applications. This setting allows capacitive touch sensing to
be disabled so that it is not used as part of the Sensor mode cycle.
enabled, the firmware tracks the charge state of the energy harvester and
attempts to manage available power to prevent fully discharging the battery.
Deep Sleep and Idle modes. If held-button detection is enabled, the Low-Power
mode can be changed at run time; otherwise, the selected mode is always used.
potentiometer voltage, capacitive touch sensors and all sensors. If held-button
detection is enabled, the sensor can be changed at run time; otherwise, the
selected sensor is always used.
transmissions enabled by default. If false, they are disabled. The state of the
transmitter can always be changed at run time by pressing S3.
 2010 Microchip Technology Inc.