PIC24FJ64GA104-I/PT Microchip Technology, PIC24FJ64GA104-I/PT Datasheet - Page 21

• Manufacturer Part Number: PIC24FJ64GA104-I/PT
• Description: IC PIC MCU FLASH 64KB 44-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ64GA104-I/PT

• Core Size: 16-Bit
• Program Memory Size: 64KB (22K x 24)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 13x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Controller Family/series: PIC24
• Ram Memory Size: 8KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: I2C, LIN, SPI, USART
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, LIN, SPI, USART
• Rohs Compliant: Yes
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, IrDA, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001, MA240020, DM240002, DM240011, DV164033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 13 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

 2010 Microchip Technology Inc.
3.1
3.2
Chapter 3. XLP 16-Bit Development Board Hardware
INTRODUCTION
HARDWARE FEATURES
This chapter provides a more detailed description of the hardware features of the XLP
16-Bit Development Board.
The key features of the XLP 16-bit board are listed below. They are represented in the
order given in Section 1.4 “Development Board Features” and Figure 1-1.
3.2.1
The XLP 16-bit board has been designed to accommodate PIC24F microcontrollers in
both 20-pin and 28-pin 300 mil PDIP packages. All pin signals on both sockets are also
available for external monitoring on the 14-pin headers (J1 and J2), located on either
side of the sockets.
3.2.1.1
The high degree of pin compatibility between PIC24F device families makes it possible
for the XLP 16-Bit Development Board to support many low pin count devices. How-
ever, there are a few minor pinout differences between families that make it difficult to
create a universal board. Of all of the board’s features described in this chapter, only
three are not universally available to all PIC24F microcontrollers. These are summa-
rized in Table 3-1, with details provided in subsequent sections. Any feature that is not
listed here is implemented uniformly for all PIC24F device families that are supported
by the development board.
TABLE 3-1:
3.2.2
The installed microcontroller has two separate oscillator circuits connected. The main
oscillator uses an 8 MHz crystal (Y1) and functions as the primary oscillator. A second
circuit, using a 32.768 kHz crystal (Y2), functions as the Timer1 oscillator, and serves
as the source for the RTCC and secondary oscillator.
28-pin J-series
28-pin K-series
20-pin K-series
Note 1:
PIC24F Device
Family
Functions as an A/D potentiometer only on these devices, and as an A/D and
HVLD reference potentiometer on all others.
PIC24F Processor Support
FEATURE AVAILABILITY BY PIC24F DEVICE FAMILY
PIC24F Oscillator Options
FEATURES THAT ARE NOT UNIVERSALLY AVAILABLE
XLP 16-BIT DEVELOPMENT KIT
Potentiometer
(Note 1)
Y
Y
Board Feature
D3 (Yellow)
N
Y
Y
USER’S GUIDE
28-Pin Modular
DS51873B-page 21
Connector
N
Y
Y