PIC18F2510-I/SP Microchip Technology, PIC18F2510-I/SP Datasheet - Page 239

• Manufacturer Part Number: PIC18F2510-I/SP
• Description: IC MCU FLASH 16KX16 28-DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F2510-I/SP

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Number Of I /o: 25
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Controller Family/series: PIC18
• No. Of I/o's: 25
• Ram Memory Size: 1.5KB
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA18XP280 - DEVICE ADAPTER 18F2220 PDIP 28LD
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 22-2:
© 2009 Microchip Technology Inc.
bit 7-5
bit 4-3
bit 2-1
bit 0
bit 7
CONFIG2L: CONFIGURATION REGISTER 2 LOW (BYTE ADDRESS 300002h)
Unimplemented: Read as ‘0’
BORV1:BORV0: Brown-out Reset Voltage bits
11 = Minimum setting
.
.
.
00 = Maximum setting
BOREN1:BOREN0: Brown-out Reset Enable bits
11 = Brown-out Reset enabled in hardware only (SBOREN is disabled)
10 = Brown-out Reset enabled in hardware only and disabled in Sleep mode
01 = Brown-out Reset enabled and controlled by software (SBOREN is enabled)
00 = Brown-out Reset disabled in hardware and software
PWRTEN: Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
Legend:
R = Readable bit
-n = Value when device is unprogrammed
Note 1: See Section 25.1 “DC Characteristics” for the specifications.
U-0
—
(SBOREN is disabled)
2: The Power-up Timer is decoupled from Brown-out Reset, allowing these features to
be independently controlled.
U-0
—
U-0
—
P = Programmable bit
BORV1
R/P-1
(2)
(1)
BORV0
(1)
R/P-1
PIC18F2X1X/4X1X
(2)
U = Unimplemented bit, read as ‘0’
u = Unchanged from programmed state
(1)
BOREN1
R/P-1
(2)
BOREN0
R/P-1
DS39636D-page 241
(2)
PWRTEN
R/P-1
bit 0
(2)