PIC24HJ128GP504-I/ML Microchip Technology, PIC24HJ128GP504-I/ML Datasheet - Page 233

• Manufacturer Part Number: PIC24HJ128GP504-I/ML
• Description: IC PIC MCU FLASH 128K 44QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ128GP504-I/ML

• Core Size: 16-Bit
• Program Memory Size: 128KB (43K x 24)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 13x10b/12b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Controller Family/series: PIC24
• No. Of I/o's: 35
• Ram Memory Size: 8192Byte
• Cpu Speed: 40MHz
• No. Of Timers: 7
• No.: RoHS Compliant
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 9
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 13 Channel
• A/d Bit Size: 12 bit
• A/d Channels Available: 13
• Height: 0.88 mm
• Length: 8 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 3 V
• Width: 8 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDAC164336 - MODULE SOCKET FOR PM3 28/44QFNDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 21-1:
© 2011 Microchip Technology Inc.
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
2:
If C2OUTEN = 1, the C2OUT peripheral output must be configured to an available RPx pin. See
Section 11.6 “Peripheral Pin Select”
If C1OUTEN = 1, the C1OUT peripheral output must be configured to an available RPx pin. See
Section 11.6 “Peripheral Pin Select”
PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
C1OUT: Comparator 1 Output bit
When C1INV = 0:
1 = C1 V
0 = C1 V
When C1INV = 1:
0 = C1 V
1 = C1 V
C2INV: Comparator 2 Output Inversion bit
1 = C2 output inverted
0 = C2 output not inverted
C1INV: Comparator 1 Output Inversion bit
1 = C1 output inverted
0 = C1 output not inverted
C2NEG: Comparator 2 Negative Input Configure bit
1 = Input is connected to V
0 = Input is connected to V
See
C2POS: Comparator 2 Positive Input Configure bit
1 = Input is connected to V
0 = Input is connected to CV
See
C1NEG: Comparator 1 Negative Input Configure bit
1 = Input is connected to V
0 = Input is connected to V
See
C1POS: Comparator 1 Positive Input Configure bit
1 = Input is connected to V
0 = Input is connected to CV
See
Figure 21-1
Figure 21-1
Figure 21-1
Figure 21-1
CMCON: COMPARATOR CONTROL REGISTER (CONTINUED)
IN
IN
IN
IN
+ > C1 V
+ < C1 V
+ > C1 V
+ < C1 V
for the comparator modes.
for the comparator modes.
for the comparator modes.
for the comparator modes.
IN
IN
IN
IN
-
-
-
-
IN
IN
IN
IN
IN
IN
REF
REF
+
-
+
+
-
+
for more information.
for more information.
DS70293E-page 233