PIC24HJ128GP504-I/ML Microchip Technology, PIC24HJ128GP504-I/ML Datasheet - Page 356

• Manufacturer Part Number: PIC24HJ128GP504-I/ML
• Description: IC PIC MCU FLASH 128K 44QFN
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ128GP504-I/ML

• Core Size: 16-Bit
• Program Memory Size: 128KB (43K x 24)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 13x10b/12b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Controller Family/series: PIC24
• No. Of I/o's: 35
• Ram Memory Size: 8192Byte
• Cpu Speed: 40MHz
• No. Of Timers: 7
• No.: RoHS Compliant
• Embedded Interface Type: CAN, I2C, SPI, UART
• Rohs Compliant: Yes
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 9
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 13 Channel
• A/d Bit Size: 12 bit
• A/d Channels Available: 13
• Height: 0.88 mm
• Length: 8 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 3 V
• Width: 8 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDAC164336 - MODULE SOCKET FOR PM3 28/44QFNDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC24HJ32GP302/304, PIC24HJ64GPX02/X04 AND PIC24HJ128GPX02/X04
Revision D (November 2009)
The revision includes the following global update:
• Added Note 2 to the shaded table that appears at
This revision also includes minor typographical and
formatting changes throughout the data sheet text.
All other major changes are referenced by their
respective section in the following table.
TABLE A-3:
DS70293E-page 356
“High-Performance, 16-bit
Microcontrollers”
Section 11.0 “I/O Ports”
Section 18.0 “Universal Asynchronous
Receiver Transmitter (UART)”
Section 20.0 “10-bit/12-bit Analog-to-Digital
Converter (ADC1)”
Section 25.0 “Special Features”
Section 28.0 “Electrical Characteristics”
Section 29.0 “High Temperature Electrical
Characteristics”
“Product Identification System”
the beginning of each chapter. This new note
provides information regarding the availability of
registers and their associated bits
Section Name
MAJOR SECTION UPDATES
Added information on high temperature operation (see “Operating
Range:”).
Changed the reference to digital-only pins to 5V tolerant pins in the
second paragraph of Section 11.2 “Open-Drain Configuration”.
Updated the two baud rate range features to: 10 Mbps to 38 bps at
40 MIPS.
Updated the ADC block diagrams (see Figure 20-1 and Figure 20-2).
Updated the second paragraph and removed the fourth paragraph in
Section 25.1 “Configuration Bits”.
Updated the Device Configuration Register Map (see Table 28-1).
Updated the Absolute Maximum Ratings for high temperature and
added Note 4.
Removed parameters DI26, DI28 and DI29 from the I/O Pin Input
Specifications (see Table 28-9).
Updated the SPIx Module Slave Mode (CKE = 1) Timing
Characteristics (see Figure 28-12).
Added new chapter with high temperature specifications.
Added the “H” definition for high temperature.
Update Description
© 2011 Microchip Technology Inc.