Z16F2811AL20SG Zilog, Z16F2811AL20SG Datasheet - Page 19

• Manufacturer Part Number: Z16F2811AL20SG
• Description: IC ZNEO MCU FLASH 128K 100LQFP
• Manufacturer: Zilog
• Series: Encore!® ZNEOr

Specifications of Z16F2811AL20SG

• Core Processor: ZNEO
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 100-LQFP
• Processor Series: Z16F2x
• Core: Zneo
• Data Bus Width: 16 bit
• Data Ram Size: 4 B
• Interface Type: ESPI, I2C, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 76
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: Z16F2800100ZCOG
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 12 Channel
• For Use With: 770-1003 - ISP 4PORT FOR ZILOG ZNEO MCU269-4537 - DEV KIT FOR Z16F ZNEO
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4533

ZNEO Peripheral Overview
PS022008-0810
10-Bit Analog-to-Digital Converter with Programmable Gain Amplifier
Analog Comparator
Operational Amplifier
General-Purpose Input/Output
Universal Asynchronous Receiver/Transmitter
Infrared Encoder/Decoders
Inter-Integrated Circuit Master/Slave Controller
Enhanced Serial Peripheral Interface
Zilog’s ZNEO peripherals are briefly described below.
The ADC converts an analog input signal to a 10-bit binary number. The ADC accepts
inputs from 12 different analog input sources.
It features an on-chip analog comparator with external input pins.
It features a two-input, one-output operational amplifier.
The ZNEO features 76 GPIO pins. Each pin is individually programmable.
It contains two fully-featured UARTs with LIN protocol support. The UART
communication is full-duplex and capable of handling asynchronous data transfers.
The UARTs support 8-bit and 9-bit data modes, selectable parity, and an efficient bus
transceiver driver enable signal for controlling a multi-transceiver bus, such as RS-485.
The ZNEO Z16F Series products contain two fully-functional, high-performance UART
to Infrared Encoder/Decoders (Endecs). Each infrared endec is integrated with an on-chip
UART to allow easy communication between the ZNEO Z16F Series device and IrDA
physical layer specification Version 1.3-compliant infrared transceivers. Infrared
communication provides secure, reliable, low-cost, and point-to-point communication
between PCs, PDAs, cell phones, printers, and other infrared enabled devices.
The I
bidirectional bus lines, a serial data (SDA) line, and a serial clock (SCL) line. The I
operates as a Master and/or Slave and supports multi-master bus arbitration.
The ESPI allows the data exchange between ZNEO Z16F Series and other peripheral
devices such as electrically erasable programmable read-only memory (EEPROMs),
ADCs, and integrated service digital network (ISDN) devices. The SPI is a full-duplex,
synchronous, character-oriented channel which supports a four-wire interface.
2
C controller makes Z16F2811 compatible with the I
P R E L I M I N A R Y
2
C protocol. It consists of two
Product Specification
ZNEO
Z16F Series
Introduction
2
C
4