PIC24HJ32GP202-I/MM Microchip Technology, PIC24HJ32GP202-I/MM Datasheet - Page 23
![IC PIC MCU FLASH 32K 28QFN](/photos/6/81/68120/150-28-qfn_sml.jpg)
PIC24HJ32GP202-I/MM
Manufacturer Part Number
PIC24HJ32GP202-I/MM
Description
IC PIC MCU FLASH 32K 28QFN
Manufacturer
Microchip Technology
Series
PIC® 24Hr
Datasheets
1.PIC24HJ12GP201-ISO.pdf
(84 pages)
2.PIC24HJ32GP202-ISO.pdf
(272 pages)
3.PIC24HJ32GP202-ISO.pdf
(8 pages)
4.PIC24HJ32GP202-ISO.pdf
(12 pages)
5.PIC24HJ32GP204-IML.pdf
(244 pages)
Specifications of PIC24HJ32GP202-I/MM
Program Memory Type
FLASH
Program Memory Size
32KB (11K x 24)
Package / Case
28-QFN
Core Processor
PIC
Core Size
16-Bit
Speed
40 MIPs
Connectivity
I²C, IrDA, LIN, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
21
Ram Size
2K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 3.6 V
Data Converters
A/D 10x10b/12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
PIC24HJ
Core
PIC
Data Bus Width
16 bit
Data Ram Size
2 KB
Interface Type
I2C/SPI/UART
Maximum Clock Frequency
40 MHz
Number Of Programmable I/os
21
Number Of Timers
3
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
52713-733, 52714-737, 53276-922, EWDSPIC
Development Tools By Supplier
PG164130, DV164035, DV244005, DV164005, PG164120, DM300027
Minimum Operating Temperature
- 40 C
On-chip Adc
10-ch x 12-bit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
3.2
The PIC24HJ32GP202/204 and PIC24HJ16GP304
CPU has a separate 16-bit-wide data memory space.
The data space is accessed using separate Address
Generation Units (AGUs) for read and write operations.
The data memory maps is shown in Figure 3-3.
All Effective Addresses (EAs) in the data memory space
are 16 bits wide and point to the bytes within the data
space. This arrangement gives a data space address
range of 64 Kbytes or 32K words. The lower half of the
data memory space (that is, when EA<15> = 0) is used
for implemented memory addresses, while the upper
half (EA<15> = 1) is reserved for the Program Space
Visibility area (see Section 3.4.3 “Reading Data From
Program Memory Using Program Space Visibility”).
PIC24HJ32GP202/204
devices implement up to 30 Kbytes of data memory.
Should an EA point to a location outside of this area, an
all-zero word or byte will be returned.
3.2.1
The data memory space is organized in byte address-
able, 16-bit wide blocks. Data is aligned in data
memory and registers as 16-bit words, but all data
space EAs resolve to bytes. The Least Significant
Bytes (LSBs) of each word have even addresses, while
the Most Significant Bytes (MSBs) have odd
addresses.
3.2.2
To maintain backward compatibility with PIC
and improve data space memory usage efficiency, the
PIC24HJ32GP202/204 and PIC24HJ16GP304 instruc-
tion set supports both word and byte operations. As a
consequence of byte accessibility, all effective address
calculations are internally scaled to step through word-
aligned memory. For example, the core recognizes that
Post-Modified Register Indirect Addressing mode
[W
operations and Ws + 2 for word operations.
Data byte reads will read the complete word that
contains the byte, using the LSB of any EA to deter-
mine which byte to select. The selected byte is placed
onto the LSB of the data path. That is, data memory
and registers are organized as two parallel byte-wide
entities with shared (word) address decode, but sepa-
rate write lines. Data byte writes only write to the corre-
sponding side of the array or register that matches the
byte address.
© 2007 Microchip Technology Inc.
S
++] will result in a value of Ws + 1 for byte
Data Address Space
DATA SPACE WIDTH
DATA MEMORY ORGANIZATION
AND ALIGNMENT
PIC24HJ32GP202/204 and PIC24HJ16GP304
and
PIC24HJ16GP304
®
devices
Preliminary
All word accesses must be aligned to an even address.
Misaligned word data fetches are not supported, so
care must be taken when mixing byte and word opera-
tions, or when translating from 8-bit MCU code. If a
misaligned read or write is attempted, an address error
trap is generated. If the error occurred on a read, the
instruction underway is completed. If the instruction
occurred on a write, the instruction is executed but the
write does not occur. In either case, a trap is then exe-
cuted, allowing the system and/or user application to
examine the machine state prior to execution of the
address Fault.
All byte loads into any W register are loaded into the
Least Significant Byte. The Most Significant Byte is not
modified.
A sign-extend instruction (SE) is provided to allow
users to translate 8-bit signed data to 16-bit signed
values. Alternatively, for 16-bit unsigned data, user
applications can clear the MSB of any W register by
executing a zero-extend (ZE) instruction on the appro-
priate address.
3.2.3
The first 2 Kbytes of the Near Data Space, from 0x0000
to 0x07FF, is primarily occupied by Special Function
Registers
PIC24HJ32GP202/204 and PIC24HJ16GP304 core
and peripheral modules to control the operation of the
device.
SFRs are distributed among the modules that they
control, and are generally grouped together by module.
Much of the SFR space contains unused addresses;
these are read as ‘0’. A complete listing of implemented
SFRs, including their addresses, is shown in Table 3-1
through Table 3-21.
3.2.4
The 8-Kbyte area between 0x0000 and 0x1FFF is
referred to as the Near Data Space. Locations in this
space are directly addressable via 13-bit absolute
address field within all memory direct instructions.
Additionally, the whole data space is addressable using
MOV instructions, which support Memory Direct
Addressing mode with a 16-bit address field, or by
using Indirect Addressing mode using a working
register as an address pointer.
Note:
SFR SPACE
The actual set of peripheral features and
interrupts varies by the device. Refer to
the corresponding device tables and
pinout diagrams for device-specific infor-
mation.
NEAR DATA SPACE
(SFRs).
These
are
DS70289A-page 21
used
by
the