PIC18LF4685-I/P Microchip Technology, PIC18LF4685-I/P Datasheet - Page 371

• Manufacturer Part Number: PIC18LF4685-I/P
• Description: IC PIC MCU FLASH 48KX16 40DIP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF4685-I/P

• Core Size: 8-Bit
• Program Memory Size: 96KB (48K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.25K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Controller Family/series: PIC18
• No. Of I/o's: 36
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3.25KB
• Cpu Speed: 40MHz
• No. Of Timers: 4
• Package: 40PDIP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 44
• Interface Type: CAN/I2C/SPI/USART
• On-chip Adc: 11-chx10-bit
• Number Of Timers: 4
• Core: PIC
• Processor Series: PIC18LF
• Maximum Clock Frequency: 40 MHz
• Data Ram Size: 3.25 KB
• Mounting Style: Through Hole
• A/d Bit Size: 10 bit
• A/d Channels Available: 11
• Height: 4.95 mm
• Length: 53.21 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2 V
• Width: 14.73 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

25.1.1
ADDLW
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
Example:
© 2009 Microchip Technology Inc.
Q Cycle Activity:
Note:
Before Instruction
After Instruction
Decode
W
W
Q1
symbolic addressing. If a label is used, the instruction format then becomes: {label} instruction argument(s).
STANDARD INSTRUCTION SET
All PIC18 instructions may take an optional label argument preceding the instruction mnemonic for use in
=
=
10h
25h
literal ‘k’
ADD Literal to W
ADDLW
0 ≤ k ≤ 255
(W) + k → W
N, OV, C, DC, Z
The contents of W are added to the
8-bit literal ‘k’ and the result is placed
in W.
1
1
ADDLW
Read
0000
Q2
15h
k
1111
Process
Data
Q3
kkkk
Write to W
PIC18F2682/2685/4682/4685
Q4
kkkk
ADDWF
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
Example:
Q Cycle Activity:
Before Instruction
After Instruction
Decode
W
REG
W
REG
Q1
=
=
=
=
register ‘f’
ADD W to f
ADDWF
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
(W) + (f) → dest
N, OV, C, DC, Z
Add W to register ‘f’. If ‘d’ is ‘0’, the
result is stored in W. If ‘d’ is ‘1’, the
result is stored back in register ‘f’
(default).
If ‘a’ is ‘0’, the Access Bank is selected.
If ‘a’ is ‘1’, the BSR is used to select the
GPR bank (default).
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f ≤ 95 (5Fh). See
Section 25.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
1
1
ADDWF
Read
0010
Q2
17h
0C2h
0D9h
0C2h
f {,d {,a}}
01da
REG, 0, 0
Process
Data
Q3
DS39761C-page 371
ffff
destination
Write to
Q4
ffff