ATMEGA168P-20PU Atmel, ATMEGA168P-20PU Datasheet - Page 295

• Manufacturer Part Number: ATMEGA168P-20PU
• Description: MCU AVR 16K FLASH 20MHZ 28-PDIP
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA168P-20PU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 23
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.300", 7.62mm)
• Processor Series: ATMEGA16x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 23
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• Controller Family/series: AVR MEGA
• No. Of I/o's: 23
• Eeprom Memory Size: 512Byte
• Ram Memory Size: 1KB
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Rohs Compliant: Yes
• Data Rom Size: 512 B
• A/d Bit Size: 10 bit
• A/d Channels Available: 6
• Height: 4.57 mm
• Length: 34.8 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Width: 7.49 mm
• For Use With: ATSTK600-TQFP32 - STK600 SOCKET/ADAPTER 32-TQFPATAVRDRAGON - KIT DRAGON 32KB FLASH MEM AVR
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

27.5
27.6
27.6.1
8025L–AVR–7/10
Page Size
Parallel Programming Parameters, Pin Mapping, and Commands
Signal Names
Table 27-9.
Table 27-10. No. of Words in a Page and No. of Pages in the EEPROM
This section describes how to parallel program and verify Flash Program memory, EEPROM
Data memory, Memory Lock bits, and Fuse bits in the ATmega48P/88P/168P. Pulses are
assumed to be at least 250 ns unless otherwise noted.
In this section, some pins of the ATmega48P/88P/168P are referenced by signal names describ-
ing their functionality during parallel programming, see
described in the following table are referenced by pin names.
The XA1/XA0 pins determine the action executed when the XTAL1 pin is given a positive pulse.
The bit coding is shown in
When pulsing WR or OE, the command loaded determines the action executed. The different
Commands are shown in
Device
ATmega48P
ATmega88P
ATmega168P
Device
ATmega48P
ATmega88P
ATmega168P
No. of Words in a Page and No. of Pages in the Flash
Flash Size
(4K bytes)
(8K bytes)
(16K bytes)
EEPROM
256 bytes
512 bytes
512 bytes
2K words
4K words
8K words
Size
Table
Table
Page Size
32 words
32 words
64 words
4 bytes
4 bytes
4 bytes
27-14.
Page
27-13.
Size
PCWORD
PCWORD
EEA[1:0]
EEA[1:0]
EEA[1:0]
PC[4:0]
PC[4:0]
PC[5:0]
ATmega48P/88P/168P
Figure 27-1
Pages
Pages
No. of
No. of
128
128
128
128
64
64
and
PCPAGE
PCPAGE
PC[10:5]
PC[11:5]
PC[12:6]
EEA[7:2]
EEA[8:2]
EEA[8:2]
Table
27-11. Pins not
EEAMSB
PCMSB
10
11
12
7
8
8
295