PIC18F65J90-I/PT Microchip Technology, PIC18F65J90-I/PT Datasheet - Page 188

• Manufacturer Part Number: PIC18F65J90-I/PT
• Description: IC PIC MCU FLASH 16KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F65J90-I/PT

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 51
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 51
• Ram Memory Size: 2KB
• Cpu Speed: 40MHz
• No. Of Timers: 4
• No. Of Pwm Channels: 2
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: AUSART, EUSART, I2C, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 51
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183030
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Package: 64TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162079 - HEADER MPLAB ICD2 18F85J90 64/80AC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC18F85J90 FAMILY
16.11 Configuring the LCD Module
The following is the sequence of steps to configure the
LCD module.
1.
2.
3.
4.
5.
DS39770C-page 188
Select the frame clock prescale using bits,
LP<3:0> (LCDPS<3:0>).
Configure the appropriate pins to function as
segment drivers using the LCDSEx registers.
Configure the appropriate pins as inputs using
the TRISx registers.
Configure the LCD module for the following
using the LCDCON register:
•
•
•
Write initial values to Pixel Data registers,
LCDDATA0 through LCDDATA23.
Multiplex and Bias mode (LMUX<1:0>)
Timing source (CS<1:0>)
Sleep mode (SLPEN)
6.
7.
8.
Configure the LCD Regulator:
a)
b)
Clear the LCD Interrupt Flag, LCDIF (PIR3<6>),
and if desired, enable the interrupt by setting the
LCDIE bit (PIE3<6>).
Enable the LCD module by setting the LCDEN
bit (LCDCON<7>).
If M2 or M3 bias configuration is to be used,
turn
CKSEL<1:0> (LCDREG<1:0>) to ‘00’. Set
or clear the CPEN bit (LCDREG<6>) to
select Mode 2 or Mode 3, as appropriate.
If M0 or M1 bias generation is to be used:
• Set the V
• Set or clear the CPEN bit to enable or
• Set
• Select a regulator clock source using the
bits (LCDREG<5:3>).
disable the charge pump.
(LCDREG<2>) to select the Bias mode.
CKSEL<1:0> bits.
off
or
BIAS
the
clear
 2010 Microchip Technology Inc.
level using the BIAS<2:0>
regulator
the
MODE13
by
setting
bit