ATXMEGA256A3B-AU Atmel, ATXMEGA256A3B-AU Datasheet - Page 49

• Manufacturer Part Number: ATXMEGA256A3B-AU
• Description: MCU AVR 256KB FLASH 64TQFP
• Manufacturer: Atmel
• Series: AVR® XMEGAr

Specifications of ATXMEGA256A3B-AU

• Core Processor: AVR
• Core Size: 8/16-Bit
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 49
• Program Memory Size: 256KB (128K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 3.6 V
• Data Converters: A/D 16x12b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TQFP, 64-VQFP
• Controller Family/series: ATXMEGA
• No. Of I/o's: 49
• Eeprom Memory Size: 4KB
• Ram Memory Size: 16KB
• Cpu Speed: 32MHz
• Rohs Compliant: Yes
• Processor Series: XMEGA
• Core: AVR
• Data Bus Width: 8 bit, 16 bit
• Data Ram Size: 16 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 49
• Number Of Timers: 7
• Operating Supply Voltage: 2.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• Operating Temperature Range: - 40 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

29. Program and Debug Interfaces
29.1
29.2
29.3
29.4
8116I–AVR–09/10
Features
Overview
JTAG interface
PDI - Program and Debug Interface
•
•
•
•
•
The programming and debug facilities are accessed through the JTAG and PDI physical inter-
faces. The PDI physical uses one dedicated pin together with the Reset pin, and no general
purpose pins are used. JTAG uses four general purpose pins on PORTB.
The JTAG physical layer handles the basic low-level serial communication over four I/O lines
named TMS, TCK, TDI, and TDO. It complies to the IEEE Std. 1149.1 for test access port and
boundary scan.
The PDI is an Atmel proprietary protocol for communication between the microcontroller and
Atmel’s development tools.
PDI - Program and Debug Interface (Atmel proprietary 2-pin interface)
JTAG Interface (IEEE std. 1149.1 compliant)
Boundary-scan capabilities according to the IEEE Std. 1149.1 (JTAG)
Access to the OCD system
Programming of Flash, EEPROM, Fuses and Lock Bits
XMEGA A3B
49