ST7FLITE25M6TR STMicroelectronics, ST7FLITE25M6TR Datasheet - Page 39

• Manufacturer Part Number: ST7FLITE25M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE25M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Table 11. SCIx_IT_Disable
Table 12. SCIx_Mode
Note: To disable the SCI Mode, select the SCIx_Init function.
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions.
Functions called
Postconditions
See also
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameter
Required Preconditions
Functions called
Postconditions
See also
SCIx_IT_Disable
Void SCIx_IT_Disable (SCI_IT_Type SCI_IT_Param)
Disables SCI interrupts
SCI_IDLE_LINE
Disable interrupt due to idle frame reception.
SCI_RECEIVE_OVERRUN
Disable interrupt due to data reception or overrun error.
SCI_TRANSMIT_REGISTER_READY
Disable interrupts triggered when transmit data register is
ready to load.
SCI_FRAME_TRANSMITTED
Disable Interrupt due to Transmission completion.
SCI_PARITY_ERROR
Disable Interrupt due to Parity Error.
None
The baudrate must have been selected
None
None
None
SCIx_Mode
Void SCIx_Mode (SCI_Mode_Type SCI_Mode_Param)
Enables Transmitter/Receiver mode of SCI.
SCI_TX_ENABLE
Enable the Transmitter mode.
SCI_RX_ENABLE
Enable the Receiver mode.
None
None
None
None
SCIx_IT_Enable must have been called for interrupt mode
Function Descriptions
39/235