MC705P6ECPE Freescale Semiconductor, MC705P6ECPE Datasheet - Page 48

• Manufacturer Part Number: MC705P6ECPE
• Description: IC MCU 8BIT EPROM 28-DIP
• Manufacturer: Freescale Semiconductor
• Series: HC05r

Specifications of MC705P6ECPE

• Core Processor: HC05
• Core Size: 8-Bit
• Speed: 2.1MHz
• Connectivity: SIO
• Peripherals: POR, WDT
• Number Of I /o: 21
• Program Memory Size: 4.5KB (4.5K x 8)
• Program Memory Type: OTP
• Ram Size: 176 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.600", 15.24mm)
• Processor Series: HC705P
• Core: HC05
• Data Bus Width: 8 bit
• Data Ram Size: 176 B
• Interface Type: SIOP
• Maximum Clock Frequency: 4.2 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 1
• Operating Supply Voltage: - 0.3 V to + 7 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 4 Channel
• On-chip Dac: 8 bit, 4 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Capture/Compare Timer
8.3.2 Timer Status Register
The timer status register (TSR), shown in
ICF — Input Capture Flag
OCF — Output Compare Flag
TOF — Timer Overflow Flag
48
•
•
•
The ICF bit is set automatically when an edge of the selected polarity occurs on the TCAP pin. Clear
the ICF bit by reading the timer status register with ICF set and then reading the low byte ($0015) of
the input capture registers. Resets have no effect on ICF.
The OCF bit is set automatically when the value of the timer registers matches the contents of the
output compare registers. Clear the OCF bit by reading the timer status register with OCF set and then
reading the low byte ($0017) of the output compare registers. Resets have no effect on OCF.
The TOF bit is set automatically when the 16-bit counter rolls over from $FFFF to $0000. Clear the
TOF bit by reading the timer status register with TOF set, and then reading the low byte ($0019) of the
timer registers. Resets have no effect on TOF.
An active signal on the TCAP pin, transferring the contents of the timer registers to the input
capture registers
A match between the 16-bit counter and the output compare registers, transferring the OLVL bit to
the TCMP pin
A timer roll over from $FFFF to $0000
Address:
Reset:
Read:
Write:
$0013
Bit 7
ICF
U
MC68HC705P6A Advance Information Data Sheet, Rev. 2.1
Figure 8-3. Timer Status Register (TSR)
= Unimplemented
OCF
U
6
TOF
Figure
U
5
8-3, contains flags to signal the following conditions:
U = Undetermined
4
0
0
3
0
0
2
0
0
1
0
0
Freescale Semiconductor
Bit 0
0
0