SAF-XE167F-96F80L AC Infineon Technologies, SAF-XE167F-96F80L AC Datasheet - Page 37

• Manufacturer Part Number: SAF-XE167F-96F80L AC
• Description: IC MCU 16BIT FLASH 144-LQFP
• Manufacturer: Infineon Technologies
• Series: XE16xr

Specifications of SAF-XE167F-96F80L AC

• Core Processor: C166SV2
• Core Size: 16-Bit
• Speed: 80MHz
• Connectivity: CAN, EBI/EMI, I²C, LIN, SPI, SSC, UART/USART, USI
• Peripherals: I²S, POR, PWM, WDT
• Number Of I /o: 118
• Program Memory Size: 768KB (768K x 8)
• Program Memory Type: FLASH
• Ram Size: 82K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LFQFP
• Data Bus Width: 16 bit
• Data Ram Size: 64 KB
• Interface Type: CAN
• Maximum Clock Frequency: 66 MHz
• Number Of Programmable I/os: 118
• Number Of Timers: 11
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 24 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000450816

Table 4
Pin
2,
36,
38,
72,
74,
108,
110,
144
1,
37,
73,
109
1) To generate the reference clock output for bus timing measurement,
2) Pin TRef was used to control the core voltage generation in step AA. For that step, pin TRef must be connected
Data Sheet
EXTCLK and P2.8 must be selected as output pin. Also the high-speed clock pad must be enabled. This
configuration is referred to as reference clock output signal CLKOUT.
to
This connection is no more required from step AB on. For the current step, pin TRef is logically not connected.
Future derivatives will feature an additional general purpose IO pin at this position.
V
DDPB
Symbol
V
V
DDPB
SS
.
Pin Definitions and Functions (cont’d)
Ctrl.
-
-
Type Function
PS/B Digital Pad Supply Voltage for Domain B
PS/-- Digital Ground
Connect decoupling capacitors to adjacent
V
Note: The on-chip voltage regulators and all ports
All
or ground-plane.
Note: Also the exposed pad is connected to
DDP
V
SS
/
V
35
except P5, P6, and P15 are fed from supply
voltage
The respective board area must be
connected to ground (if soldered) or left free.
SS
pins must be connected to the ground-line
pin pairs as close as possible to the pins.
V
DDPB
.
XE166 Family Derivatives
General Device Information
f
SYS
must be selected as source for
V2.1, 2008-08
XE167x
V
SS
.