SAF-TC1130-L150EB-G BB Infineon Technologies, SAF-TC1130-L150EB-G BB Datasheet - Page 47

• Manufacturer Part Number: SAF-TC1130-L150EB-G BB
• Description: IC MCU 32BIT TRICOR 16KB LBGA208
• Manufacturer: Infineon Technologies
• Series: TC11xxr

Specifications of SAF-TC1130-L150EB-G BB

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: CAN, EBI/EMI, FIFO, I²C, IrDA, SPI, UART/USART, USB
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Type: ROMless
• Ram Size: 144K x 8
• Voltage - Supply (vcc/vdd): 1.43 V ~ 1.58 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-LSBGA
• Data Bus Width: 32 bit
• Program Memory Size: 32 KB
• Data Ram Size: 144 KB
• Interface Type: 3xASC, 2xSSC, I2C, 2xMLI, Ethernet 10, 100 Mbits, s, USB
• Maximum Clock Frequency: 150 MHz
• Number Of Programmable I/os: 72
• Number Of Timers: 9
• Operating Supply Voltage: 1.5 V, 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Packages: PG-LBGA-208
• Max Clock Frequency: 150.0 MHz
• Sram (incl. Cache): 144.0 KByte
• Can Nodes: 4
• Program Memory: 0.0 KByte
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: FT1130L150EBGBBXP; SAF-TC1130-L150EB-GBB; SAF-TC1130-L150EB-GBBINTR; SAF-TC1130-L150EB-GBBTR; SAF-TC1130-L150EB-GBBTR; SAFTC1130L150EBBBXT; SP000106119; SP000106538; SP000743584

3.10
Figure 3-6
Serial interfaces (SSC0 and SSC1).
Each SSC supports full-duplex and half-duplex serial synchronous communication up to
37.5 MBaud (@ 75 MHz module clock) with receive and transmit FIFO support. The
serial clock signal can be generated by the SSC itself (master mode) or can be received
from an external master (slave mode). Data width, shift direction, clock polarity and
phase are programmable. This allows communication with SPI-compatible devices.
Transmission and reception of data is double-buffered. A shift clock generator provides
the SSC with a separate serial clock signal. Eight slave select inputs are available for
slave mode operation. Eight programmable slave select outputs (chip selects) are
supported in master mode.
Features:
• Master and slave mode operation
• Flexible data format
• Baud rate generation minimum at 572.2 Baud (@ 75 MHz module clock)
• Interrupt generation
• Four-pin interface
• Flexible SSC pin configuration
• Up to eight slave select inputs in slave mode
• Up to eight programmable slave select outputs SLSO in master mode
• 4-stage receive FIFO (RXFIFO) and 4-stage transmit FIFO (TXFIFO)
Data Sheet
– Full-duplex or half-duplex operation
– Automatic pad control possible
– Programmable number of data bits: 2 to 16 bits
– Programmable shift direction: LSB or MSB shift first
– Programmable clock polarity: idle low or high state for the shift clock
– Programmable clock/data phase: data shift with leading or trailing edge of the shift
– On a transmitter empty condition
– On a receiver full condition
– On an error condition (receive, phase, baud rate, transmit error)
– Automatic SLSO generation with programmable timing
– Programmable active level and enable control
– Independent control of RXFIFO and TXFIFO
– 2- to 16-bit FIFO data width
– Programmable receive/transmit interrupt trigger level
– Receive and transmit FIFO filling level indication
– Overrun error generation
– Underflow error generation
clock
High-Speed Synchronous Serial Interface (SSC)
shows a global view of the functional blocks of two High-Speed Synchronous
41
Functional Description
V1.1, 2008-12
TC1130