SAK-TC1796-256F150E BE Infineon Technologies, SAK-TC1796-256F150E BE Datasheet - Page 60

• Manufacturer Part Number: SAK-TC1796-256F150E BE
• Description: IC MCU 32BIT FLASH 416-BGA
• Manufacturer: Infineon Technologies
• Series: TC17xxr

Specifications of SAK-TC1796-256F150E BE

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: ASC, CAN, EBI/EMI, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 123
• Program Memory Size: 2MB (2M x 8)
• Program Memory Type: FLASH
• Ram Size: 256K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 44x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 416-BGA
• Data Bus Width: 32 bit
• Data Ram Size: 256 KB
• Interface Type: ASC, JTAG, MLI, MSC, SSC
• Maximum Clock Frequency: 150 MHz
• Number Of Programmable I/os: 119
• Number Of Timers: 260
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (12 bit, 16 Channel) / 10 bit, 4 Channel
• Packages: P-BGA-416
• Max Clock Frequency: 150.0 MHz
• Sram (incl. Cache): 256.0 KByte
• Can Nodes: 4
• A / D Input Lines (incl. Fadc): 44
• Program Memory: 2.0 MB
• For Use With: B158-H8537-G2-X-7600IN - KIT STARTER TC179X FAMILY
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: SP000438972

3.14.1
Each of the General Purpose Timer Arrays (GPTA0 and GPTA1) provides a set of
hardware modules required for high speed digital signal processing:
•
•
•
•
•
•
•
Input lines can be shared by an LTC and a GTC to trigger their programmed operation
simultaneously.
The following sections summarize the specific features of the GPTA units. The clock
signal
Clock Generation Unit
•
•
Data Sheet
Filter and Prescaler Cells (FPC) support input noise filtering and prescaler operation.
Phase Discrimination Logic units (PDL) decode the direction information output by a
rotation tracking system.
Duty Cycle Measurement Cells (DCM) provide pulse-width measurement
capabilities.
A Digital Phase Locked Loop unit (PLL) generates a programmable number of GPTA
module clock ticks during an input signal’s period.
Global Timer units (GT) driven by various clock sources are implemented to operate
as a time base for the associated Global Timer Cells.
Global Timer Cells (GTC) can be programmed to capture the contents of a Global
Timer on an external or internal event. A GTC may be also used to control an external
port pin depending on the result of an internal compare operation. GTCs can be
logically concatenated to provide a common external port pin with a complex signal
waveform.
Local Timer Cells (LTC) operating in Timer, Capture, or Compare Mode may be also
logically tied together to drive a common external port pin with a complex signal
waveform. LTCs — enabled in Timer Mode or Capture Mode — can be clocked or
triggered by various external or internal events.
Filter and Prescaler Cell (FPC)
– Six independent units
– Three basic operating modes:
– Selectable input sources:
– Selectable input clocks:
–
Phase Discriminator Logic (PDL)
– Two independent units
– Two operating modes (2 and 3 sensor signals)
Prescaler, Delayed Debounce Filter, Immediate Debounce Filter
Port lines, GPTA module clock, FPC output of preceding FPC cell
GPTA module clock, prescaled GPTA module clock, DCM clock, compensated or
uncompensated PLL clock.
f
f
GPTA
GPTA
/2 maximum input signal frequency in Filter Modes
Functionality of GPTA0/GPTA1
is the input clock of the GPTA modules (max. 75 MHz in TC1796).
60
Functional Description
V1.0, 2008-04
TC1796