AT91FR40162-CI Atmel, AT91FR40162-CI Datasheet - Page 7

• Manufacturer Part Number: AT91FR40162-CI
• Description: IC ARM7 MCU 2M FLASH 121 PBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91FR40162-CI

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 75MHz
• Connectivity: EBI/EMI, UART/USART
• Peripherals: WDT
• Number Of I /o: 32
• Program Memory Size: 2MB (1M x 16)
• Program Memory Type: FLASH
• Ram Size: 256K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 121-BGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

5.2.1
5.2.2
2632D–ATARM–15-Sep-05
System Peripherals
User Peripherals
The External Bus Interface (EBI) controls the external memory or peripheral devices via an 8-
or 16-bit databus and is programmed through the APB. Each chip select line has its own pro-
gramming register.
The Power-saving (PS) module implements the Idle Mode (ARM7TDMI core clock stopped
until the next interrupt) and enables the user to adapt the power consumption of the microcon-
troller to application requirements (independent peripheral clock control).
The Advanced Interrupt Controller (AIC) controls the internal interrupt sources from the inter-
nal peripherals and the four external interrupt lines (including the FIQ) to provide an interrupt
and/or fast interrupt request to the ARM7TDMI. It integrates an 8-level priority controller, and,
using the Auto-vectoring feature, reduces the interrupt latency time.
The Parallel Input/Output Controller (PIO) controls up to 32 I/O lines. It enables the user to
select specific pins for on-chip peripheral input/output functions, and general-purpose
input/output signal pins. The PIO controller can be programmed to detect an interrupt on a sig-
nal change from each line.
The Watchdog (WD) can be used to prevent system lock-up if the software becomes trapped
in a deadlock.
The Special Function (SF) module integrates the Chip ID, the Reset Status and the Protect
registers.
Two USARTs, independently configurable, enable communication at a high baud rate in syn-
chronous or asynchronous mode. The format includes start, stop and parity bits and up to 8
data bits. Each USART also features a Timeout and a Time Guard register, facilitating the use
of the two dedicated Peripheral Data Controller (PDC) channels.
The 3-channel, 16-bit Timer Counter (TC) is highly programmable and supports capture or
waveform modes. Each TC channel can be programmed to measure or generate different
kinds of waves, and can detect and control two input/output signals. The TC has also 3 exter-
nal clock signals.
AT91FR40162
7