MC68HC908GR8CP Freescale Semiconductor, MC68HC908GR8CP Datasheet - Page 162

• Manufacturer Part Number: MC68HC908GR8CP
• Description: IC MCU FLASH 8BIT 8MHZ 4K 28-DIP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908GR8CP

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 17
• Program Memory Size: 7.5KB (7.5K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-DIP (0.600", 15.24mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Flash Memory
11.7 FLASH Program/Read Operation
Technical Data
162
Programming of the FLASH memory is done on a row basis. A row
consists of 32 consecutive bytes starting from addresses $XX00,
$XX20, $XX40, $XX60, $XX80, $XXA0, $XXC0, and $XXE0. Use this
step-by-step procedure to program a row of FLASH memory
2
* The time between each FLASH address change, or the time between the last FLASH address
programmed to clearing PGM bit, must not exceed the maximum programming time, t
This program sequence is repeated throughout the memory until all data
is programmed.
10. Clear the PGM bit.*
11. Wait for a time, t
12. Clear the HVEN bit.
13. After time, t
is a flowchart representation):
1. Set the PGM bit. This configures the memory for program
2. Read from the FLASH block protect register.
3. Write any data to any FLASH address within the row address
4. Wait for a time, t
5. Set the HVEN bit.
6. Wait for a time, t
7. Write data to the FLASH address to be programmed.*
8. Wait for a time, t
9. Repeat step 7 and 8 until all the bytes within the row are
Freescale Semiconductor, Inc.
For More Information On This Product,
operation and enables the latching of address and data for
programming.
range desired.
programmed.
mode again.
Go to: www.freescale.com
rcv
Flash Memory
(min. 1 s), the memory can be accessed in read
nvs
pgs
PROG
nvh
(min. 10 s).
(min. 5 s).
(min. 5 s).
(min. 30 s).
MC68HC908GR8 — Rev 4.0
(Figure 11-
MOTOROLA
PROG
max.