GS-BT2416C1DBAT1 STMicroelectronics, GS-BT2416C1DBAT1 Datasheet - Page 16

• Manufacturer Part Number: GS-BT2416C1DBAT1
• Description: BOARD DEMO CLASS 1 W/SERIAL PORT
• Manufacturer: STMicroelectronics
• Type: Bluetoothr

Specifications of GS-BT2416C1DBAT1

• Contents: Board
• Processor Series: STLC2500
• Wireless Frequency: 2.4 GHz to 2.5 GHz
• Interface Type: RS-232, USB
• For Use With/related Products: GS-BT2416C1.A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-5793

AT commands appendix
7.4
16/19
Module BT address
Note that:
●
●
After the modules have been programmed, you can power off and power on again the
modules themselves. At a certain point the modules will be connected to each other (LED
on) without any intervention.
The sequence of powering on does not matter. The only rule to follow is that, once the Client
has been powered on, the Server must be powered in the time set by the 10 retries at 5 sec
intervals.
During the macro execution the module answers with "OK” or "ERROR" for each command
executed. This feedback can be eliminated using the AT+ECHO=OFF command.
Each module has its own address which identifies the module itself in the network. The
above examples were used with addresses 0080E1000001 and 0080E1000002.
Modules on the GS-BT2416C1DBAT1 board may have different addresses. Before starting
to send commands, the module address can be found with the command
AT+BTSETTINGS=? which shows the relevant information of the module including the BT
address.
When the address module to connect is known, the inquiry command can be omitted
The BTCONNECT command has been set to 10 retries at 5 sec intervals.
UM0471