101-1284 Rabbit Semiconductor, 101-1284 Datasheet - Page 100

• Manufacturer Part Number: 101-1284
• Description: DEV KIT STANDARD MINI RCM5600W
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r
• Type: Transceiver, 802.11 b/gr

Specifications of 101-1284

• Frequency: 2.4GHz
• Wireless Frequency: 2.4 GHz
• Interface Type: USB
• Operating Voltage: 3.3 V
• Output Power: 19 dBm
• Antenna: U.FL Connector
• Operating Temperature Range: - 30 C to + 55 C
• Silicon Manufacturer: Rabbit Semiconductor
• Silicon Family Name: RabbitCore
• Kit Contents: Board
• Features: On-board Single-Chip 802.11b/g Transceiver, Built-In Web Server
• Development Tool Type: Hardware /
• Rohs Compliant: Yes
• For Use With/related Products: RCM5600W
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1160

C.1 Introduction
The Prototyping Board included in the Development Kit provides a prototyping area for
more advanced hardware development. The Prototyping Board is shown below in
Figure C-1, with its main features identified.
C.1.1 Prototyping Board Features
•
•
•
•
94
Power Connection
header socket connections.
Power LED
Board.
Module Extension Headers
duplicated below header J2. Developers can solder wires directly into the appropriate
holes, or, for more flexible development, a 2 × 25 header strip with a 0.1" pitch can be
soldered into place. See Figure C-4 for the header pinouts.
Prototyping Area
through-hole and surface-mount components. +3.3 V and ground buses run along the
left and right edges of the through-hole prototyping area. The through-hole area is set
up to accept components with a pitch of 0.1" or widths of 0.3" or 0.6". Several areas for
surface-mount devices are also available. (Note that there are SMT pads on both the top
and the bottom of the Prototyping Board.) Each SMT pad is connected to a hole
designed to accept a 30 AWG solid wire.
—The power LED lights whenever power is connected to the Prototyping
—A generous prototyping area is provided for the installation of
—Power is supplied to the Prototyping Board via the RCM5600W
Figure C-1. Prototyping Board
—The complete pin set of the RCM5600W module is
MiniCore RCM5600W