101-1284 Rabbit Semiconductor, 101-1284 Datasheet - Page 21

• Manufacturer Part Number: 101-1284
• Description: DEV KIT STANDARD MINI RCM5600W
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r
• Type: Transceiver, 802.11 b/gr

Specifications of 101-1284

• Frequency: 2.4GHz
• Wireless Frequency: 2.4 GHz
• Interface Type: USB
• Operating Voltage: 3.3 V
• Output Power: 19 dBm
• Antenna: U.FL Connector
• Operating Temperature Range: - 30 C to + 55 C
• Silicon Manufacturer: Rabbit Semiconductor
• Silicon Family Name: RabbitCore
• Kit Contents: Board
• Features: On-board Single-Chip 802.11b/g Transceiver, Built-In Web Server
• Development Tool Type: Hardware /
• Rohs Compliant: Yes
• For Use With/related Products: RCM5600W
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1160

Your PC should recognize the new USB hardware, and the LEDs next to the USB connec-
tor on the Interface Board will flash — if you get an error message, you will have to install
USB drivers. Drivers for Windows XP are available in the Dynamic C
USB Programming Cable\WinXP_2K
the USB drivers. Drivers for other operating systems are available online at
www.ftdichip.com/Drivers/VCP.htm.
The green power LED on the Interface Board should light up when you connect the USB
cable. The RCM5600W and the Interface Board are now ready to be used.
Alternate Power Supply Connections — Deluxe Development Kit
The deluxe Development Kit contains a separate AC adapter that may be used to supply
power to the Interface Board and the RCM5600W when the USB cable is not connected or
when more power is needed than the USB cable is able to supply. The AC adapter may
also be used to supply power when the USB cable is connected, in which case the power
supply through the USB cable will be disconnected automatically.
OEM User’s Manual
NOTE: A RESET button is provided on the Interface Board to allow a hardware reset
NOTE: Pins 1–2 on header JP1 on the Interface Board must be jumpered to download
CAUTION: Do not jumper pins 1–3 on header JP1 on the Interface Board.
Figure 5. Alternate Power Supply Connections—Deluxe Development Kit
without disconnecting power.
and debug applications and sample programs with Dynamic C running. Pins 1–2 should
be left unjumpered to run an program already loaded in flash memory.
folder — double-click
DPInst.exe
Drivers\Rabbit
to install
15