TDA7210 Infineon Technologies, TDA7210 Datasheet - Page 21

• Manufacturer Part Number: TDA7210
• Description: IC RECEIVER FSK/ASK 28-TSSOP
• Manufacturer: Infineon Technologies
• Type: ASK/FSK Single Conversion Receiverr

Specifications of TDA7210

• Package / Case: 28-TSSOP
• Frequency: 810MHz ~ 870MHz, 400MHz ~ 440MHz
• Sensitivity: -110dBm
• Data Rate - Maximum: 100 kbps
• Modulation Or Protocol: ASK, FSK
• Applications: Remote Control, RKE, Security Systems
• Current - Receiving: 5.9mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Operating Supply Voltage: 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Supply Current: 7.7 mA
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.5 V
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.5V
• Operating Supply Voltage (max): 5.5V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 28
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Memory Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: SP000524274; TDA7210; TDA7210INTR

Wireless Components
3.4.10
3.4.9
Peak Detector
The peak detector generates a DC voltage which is proportional to the peak
value of the receive data signal. An external RC network is necessary. The input
is connected to the output of the RSSI-output of the Limiter, the output is con-
nected to the PDO pin (Pin 26 ). This output can be used as an indicator for the
received signal strength to use in wake-up circuits and as a reference for the
data slicer in ASK mode. Note that the RSSI level is also output in case of FSK
mode.
Bandgap Reference Circuitry
A Bandgap Reference Circuit provides a temperature stable reference voltage
for the device. A power down mode is available to switch off all subcircuits which
is controlled by the PWDN pin (Pin 27) as shown in the following table. The sup-
ply current drawn in this case is typically 50nA.
Table 3-5 PDWN Pin Operating States
PDWN
Open or tied to ground
Tied to Vs
3 - 13
Powerdown Mode
Operating State
Data Sheet, December 2008
Receiver On
Functional Description
TDA7210