AT86RF230-ZUR Atmel, AT86RF230-ZUR Datasheet - Page 8

• Manufacturer Part Number: AT86RF230-ZUR
• Description: TXRX LOW POWER 2.4GHZ 32VQFN
• Manufacturer: Atmel

Specifications of AT86RF230-ZUR

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.15.4 Zigbee, 6LoWPAN, RF4CE, SP100, WirelessHART™, ISM
• Applications: Industrial Monitoring and Control, Wireless Alarm and Security Systems
• Power - Output: -17dBm ~ 3dBm
• Sensitivity: -101dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 15.5mA
• Current - Transmitting: 16.5mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 2405 MHz to 2480 MHz
• Interface Type: SPI
• Noise Figure: 6 dB
• Output Power: 20 dB
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 16.5 mA
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Protocol Supported: 802.15.4
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 1.8V
• Operating Supply Voltage (typ): 3V
• Operating Supply Voltage (max): 3.6V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Data Rate - Maximum: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5 Application Circuit
8
AT86RF230
Table 4-6. CLKM Driver Strength
• Bit 3 – CLKM_SHA_SEL
Refer to section 9.6.5.
• Bit [2:0] – CLKM_CTRL
Refer to section 9.6.5.
An application circuit of the AT86RF230 radio transceiver with a single-ended RF
connector is shown in Figure 5-1. The balun B1 transforms the 100Ω differential RF port
(RFP/RFN) to a 50Ω single-ended RF port. The capacitors C1 and C2 provide AC
coupling of the RF signals to the RF pins.
Figure 5-1. Application Circuit Schematic
The power supply decoupling capacitors (CB2, CB4) are connected to the external
analog supply pin (EVDD, pin 28) and the external digital supply pin (DEVDD, pin 15).
Register Bit
PAD_IO_CLKM
RST
Value
0
1
2
3
Description
2 mA
4 mA
6 mA
8 mA
SEL
5131E-MCU Wireless-02/09