30068 Parallax Inc, 30068 Datasheet - Page 70

• Manufacturer Part Number: 30068
• Description: EMBEDDED BLUE TRANSCEIVER APPMOD
• Manufacturer: Parallax Inc

Specifications of 30068

• Frequency: 2.4GHz
• Data Rate - Maximum: 90kBaud
• Modulation Or Protocol: Bluetooth v1.1, Class 2
• Applications: Bluetooth v1.1
• Power - Output: -4dBm
• Sensitivity: -85dBm
• Voltage - Supply: 5 V ~ 10 V
• Current - Receiving: 80mA
• Current - Transmitting: 250mA
• Data Interface: PCB, Through Hole
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 75°C
• Package / Case: Module
• Product: Microcontroller Accessories
• Operating Supply Voltage: 5 to 12 V
• Memory Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q2239141

Communications
Page 64 ▪ EmbeddedBlue 500 User Manual
2. Reset the eb500 attached to the Board of Education board to place the eb500 into
3. Using HyperTerminal, acquire the device address of the eb500 connected to the
4. Using the BASIC Stamp Editor, on the File menu, click New.
5. Enter the following program code into the editor, replacing the device address with
command mode.
To reset the eb500 attached to the Board of Education board, disconnect the power,
wait a couple of seconds, and then reconnect the power. The Reset push button on
the Board of Education board will NOT reset the eb500.
eb600 PC Adapter by using the eb500 GET ADDRESS serial command.
Please note the device address as it will be used in the BASIC Stamp application
developed in the following actions.
By issuing the GET ADDRESS command, the eb500 connected to the eb600 will
return its own device address.
To obtain the device address, type get address at the “>” prompt and press the
return key.
Example:
This will create a new project window within the BASIC Stamp Editor.
the device address obtained from the GET ADDRESS command issued above. This
application is available in electronic form on the accompanying CD, in the Samples
folder, in the file HelloWorld.bs2.
'{$STAMP BS2}
nCount VAR BYTE
'Wait for the eb500 radio to be ready
PAUSE 1000
'Connect to the remote device
SEROUT 1,84,[“con 00:0C:84:00:05:29”,CR]
SERIN 0,84,[WAIT(“ACK”,CR)]
>get address
ACK
00:0C:84:00:07:D8
>